201010015 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

201010015: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, surface_finish: 125.0 MICROINCHES OVERALL, first_end_style: CHAMFERED, hardness_rating: 55.0 ROCKWELL D MINIMUM AND 60.0 ROCKWELL D MAXIMUM OVERALL, pin_overall_length: 1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, pin_overall_diameter: 0.1245 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-501-3546, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

201010015

NSN: 5315-00-501-3546
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: T6472 — SAMSUN YURT SAV.SAN. VE TIC.A.S. (TUR)

SPECIFICATIONS

material	STEEL OVERALL
surface_finish	125.0 MICROINCHES OVERALL
first_end_style	CHAMFERED
hardness_rating	55.0 ROCKWELL D MINIMUM AND 60.0 ROCKWELL D MAXIMUM OVERALL
pin_overall_length	1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
pin_overall_diameter	0.1245 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM IN
first_end_taper_angle	45.0 DEGREES NOMINAL
first_end_taper_length	0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
second_end_relationship_with_first_end	IDENTICAL
NSN	5315-00-501-3546

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 125.0 MICROINCHES OVERALL

•

FIRST END TAPER LENGTH: 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN

•

FIRST END STYLE: CHAMFERED

•

HARDNESS RATING: 55.0 ROCKWELL D MINIMUM AND 60.0 ROCKWELL D MAXIMUM OVERALL

•

FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL

•

PIN OVERALL DIAMETER: 0.1245 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM IN

•

PIN OVERALL LENGTH: 1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN

•

SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL

TECHNICAL CHARACTERISTICS

SURFACE FINISH	125.0 MICROINCHES OVERALL
FIRST END TAPER LENGTH	0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
FIRST END STYLE	CHAMFERED
HARDNESS RATING	55.0 ROCKWELL D MINIMUM AND 60.0 ROCKWELL D MAXIMUM OVERALL
FIRST END TAPER ANGLE	45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER	0.1245 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM IN
PIN OVERALL LENGTH	1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL
MATERIAL	STEEL OVERALL

SUBSTITUTES & CROSS-REFERENCES 7

75F6005Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

A20165Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5315005013546Reference document

Same NSN cross-reference

Reference document — Informative reference only

3662000992Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5315PL0920530Reference document

Same NSN cross-reference

Reference document — Informative reference only

A10331Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 201010015?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 201010015?

201010015 is a PIN,STRAIGHT,HEADLESS.

What parts can replace 201010015?

There are 7 known substitutes for 201010015: 75F6005, A20165, 5315005013546 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 201010015?

201010015 is cataloged in the U.S. Government catalog under NSN 5315-00-501-3546. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

201010015 — PIN,STRAIGHT,HEADLESS

Request a Quote — 201010015