PartsTable
Technical Data Sheet
Download PDF

2010-88 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

2010-88: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include fork_depth: 1.25 INCHES NOMINAL IN, overall_width: 1.25 INCHES NOMINAL IN, fork_span_width: 0.560 INCHES NOMINAL IN, special_features: SECURING PIN LENGTH 1.37 IN. INCLUDES COTTER PIN.

IN, style_designator: CLEVIS, nominal_thread_size: 0.25 INCHES SHANK IN. This part is cataloged in the U.S. Government catalog under NSN 5305-00-969-2422, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2010-88
NSN: 5305-00-969-2422
NIINs: 009692422, 016202381
FSC: 5305 — Screws
CAGE: 0Y4A4 — WALTHAM AIRCRAFT CLOCK CORP (USA)
SPECIFICATIONS
fork_depth1.25 INCHES NOMINAL IN
overall_width1.25 INCHES NOMINAL IN
fork_span_width0.560 INCHES NOMINAL IN
special_featuresSECURING PIN LENGTH 1.37 IN. INCLUDES COTTER PIN. IN
style_designatorCLEVIS
nominal_thread_size0.25 INCHES SHANK IN
thread_quantity_per_inch20 SHANK
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) SHANK
securing_pin_hole_diameter0.50 INCHES NOMINAL IN
distance_from_pivot_pinhole_center_to_rod_connection_end1.72 INCHES NOMINAL IN
NSN5305-00-969-2422
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2010-88 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.400 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: NICKEL
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
THREAD LENGTH: 0.600 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.600 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.400 INCHES NOMINAL IN
SCREW SURFACE TREATMENTNICKEL
FASTENER LENGTH1.000 INCHES NOMINAL IN
THREAD LENGTH0.600 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.600 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
THREAD QUANTITY PER INCH169
SUBSTITUTES & CROSS-REFERENCES 2
78Reference document
Same NSN cross-reference
Reference document — Secondary reference
20000078Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2010-88?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2010-88?
2010-88 is a SCREW,MACHINE.
What parts can replace 2010-88?
There are 2 known substitutes for 2010-88: 78, 20000078. Substitute compatibility should be verified for your specific system.
What is the NSN for 2010-88?
2010-88 is cataloged in the U.S. Government catalog under NSN 5305-00-969-2422. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2010-88

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.