The Shaft,propulsion,ship, cataloged under National Stock Number 2010-00-678-0415, is classified within Federal Supply Class 2010 (Ship and Boat Propulsion Components) of the Ship and Marine Equipment group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2010-00-678-0415 |
| Item Name | Shaft,propulsion,ship |
| FSC / FSG | 2010 / 20 — Ship and Boat Propulsion Components |
| Status | ACTIVE |
| Forward End Coupling Design | INTEGRAL |
| Taper | 1.000 PER FOOT IN INCHES NOMINAL |
| Forward Bearing Sleeve Length | 4.349 FEET NOMINAL FT |
| Surface Finish | SMOOTH MACHINED |
| After End Design | TAPERED |
| Quantity | 2 |
| Forward End Coupling Thickness | 3.750 INCHES NOMINAL IN |
| Material Document and Classification | MIL-S-890, CLASS AN MIL SPEC SINGLE MATERIAL RESPONSE |
| Outside Diameter | 18.500 INCHES NOMINAL IN |
| Thread Length | 10.250 INCHES IN |
| Taper Major Diameter | 18.500 INCHES NOMINAL IN |
| Forward Bearing Sleeve Outside Diameter | 20.250 INCHES NOMINAL IN |
| Covering Location | SURFACES BETWEEN BEARING SLEEVES COVERED |
| Forward End Coupling Outside Diameter | 30.625 INCHES NOMINAL IN |
| Inside Diameter | 4.875 INCHES MINIMUM AND 11.000 INCHES MAXIMUM IN |
| After Bearing Sleeve Outside Diameter | 20.250 INCHES NOMINAL IN |
| Taper Length | 3.823 FEET NOMINAL FT |
| Protective Covering Type | RUBBER |
| Unit Type | PROPELLER SHAFT SECTION |
| Depth | 1.498 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN |
| Width | 3.500 INCHES MINIMUM AND 3.563 INCHES MAXIMUM IN |
| Material | STEEL |
| Usage Design | SUITABLE FOR DDG 2 CLASS |
| After Bearing Sleeve Length | 6.802 FEET NOMINAL FT |
| Major Diameter | 11.250 INCHES NOMINAL IN |
| Furnished Items and Quantity | COUPLING BOLT,12; COUPLING NUT,12; PROPELLER KEY,2; PROPELLER NUT,1 |
| Thread Quantity | 4 PER INCH |
| Construction | HOLLOW |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| DDG2-203-1710538PC101 | 3/2 Design control — primary reference U.S. Government activity |
NSN 2010-00-678-0415 is a Shaft,propulsion,ship, classified under FSC 2010, Ship and Boat Propulsion Components. Status: active.
Key specifications for 2010-00-678-0415: Forward End Coupling Design: INTEGRAL; Taper: 1.000 PER FOOT IN INCHES NOMINAL; Forward Bearing Sleeve Length: 4.349 FEET NOMINAL FT; Surface Finish: SMOOTH MACHINED. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.