PartsTable TECHNICAL DATA SHEET
NSN 2010-00-541-0110Government record, cited

Shaft, Propulsion, Ship2010-00-541-0110

NSN 2010-00-541-0110 · NIIN 005410110
FSC 2010 — Ship and Boat Propulsion Components · FSG 20 — Ship and Marine Equipment
Government record, cited
Also searched as  2010-00-541-0110 · 2010005410110 · NIIN 005410110 · 00-541-0110 · FSC 2010 Ship and Boat Propulsion Components
Nearby stock numbers  ·
Features
  • Shaft,propulsion,ship — FSC 2010
  • Keyway Depth: 0.750 INCHES NOMINAL IN
  • Taper: 1.000 PER FOOT IN INCHES NOMINAL
  • Forward Bearing Sleeve Length: 4.583 FEET NOMINAL FT
  • Surface Finish: SMOOTH MACHINED
  • After End Design: TAPERED
  • Quantity: 2
  • Material Document and Classification: MIL-S-890,FORGED MIL SPEC SINGLE MATERIAL RESPONSE
Identification
  • NSN: 2010-00-541-0110
  • NIIN: 005410110
  • FSC: 2010 — Ship and Boat Propulsion Components
  • FSG: 20 — Ship and Marine Equipment
General Description

The Shaft,propulsion,ship, cataloged under National Stock Number 2010-00-541-0110, is classified within Federal Supply Class 2010 (Ship and Boat Propulsion Components) of the Ship and Marine Equipment group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN2010-00-541-0110
Item NameShaft,propulsion,ship
FSC / FSG2010 / 20 — Ship and Boat Propulsion Components
StatusACTIVE
Keyway Depth0.750 INCHES NOMINAL IN
Taper1.000 PER FOOT IN INCHES NOMINAL
Forward Bearing Sleeve Length4.583 FEET NOMINAL FT
Surface FinishSMOOTH MACHINED
After End DesignTAPERED
Quantity2
Material Document and ClassificationMIL-S-890,FORGED MIL SPEC SINGLE MATERIAL RESPONSE
Forward End Taper0.125 PER FOOT IN INCHES NOMINAL
Outside Diameter12.533 INCHES NOMINAL IN
Forward End DesignTAPERED
Thread Length7.625 INCHES IN
Forward End Taper Length1.258 FEET NOMINAL FT
Taper Major Diameter12.500 INCHES NOMINAL IN
Keyway Quantity3 AND 1
Forward Bearing Sleeve Outside Diameter13.625 INCHES NOMINAL IN
Covering LocationSURFACES BETWEEN BEARING SLEEVES COVERED
Forward End Taper Major Diameter13.500 INCHES NOMINAL IN
Inside Diameter3.500 INCHES MINIMUM AND 7.000 INCHES MAXIMUM IN
After Bearing Sleeve Outside Diameter13.625 INCHES NOMINAL IN
Taper Length1.959 FEET NOMINAL FT
Protective Covering TypeRUBBER
Unit TypePROPELLER SHAFT SECTION
Keyway Width1.500 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN
Depth1.000 INCHES NOMINAL IN
Width2.375 INCHES MINIMUM AND 2.438 INCHES MAXIMUM IN
MaterialSTEEL
After Bearing Sleeve Length6.500 FEET NOMINAL FT
Major Diameter8.000 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL B — Remove Demilitarization Key Points
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeS
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
SS580-203-1700402 3/1 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 2010 — Ship and Boat Propulsion Components
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
2010-00-001-0005
SHAFT,PROPULSION,SHIP
2010-00-001-1564
BRAKE ELEMENT ASSEM
2010-00-001-1564
BRAKE ELEMENT ASSEM
2010-00-001-1565
CLUTCH ELEMENT ASSE
2010-00-001-1634
2010-00-001-1634 · Item name not on file
2010-00-001-1635
2010-00-001-1635 · Item name not on file
2010-00-001-1636
2010-00-001-1636 · Item name not on file
2010-00-001-1637
2010-00-001-1637 · Item name not on file

Frequently Asked Questions

What is NSN 2010-00-541-0110?

NSN 2010-00-541-0110 is a Shaft,propulsion,ship, classified under FSC 2010, Ship and Boat Propulsion Components. Status: active.

What are the specifications of 2010-00-541-0110?

Key specifications for 2010-00-541-0110: Keyway Depth: 0.750 INCHES NOMINAL IN; Taper: 1.000 PER FOOT IN INCHES NOMINAL; Forward Bearing Sleeve Length: 4.583 FEET NOMINAL FT; Surface Finish: SMOOTH MACHINED. 28 specifications are documented in the U.S. Government catalog.

Is NSN 2010-00-541-0110 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 2010-00-541-0110?

NSN 2010-00-541-0110 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com