PartsTable TECHNICAL DATA SHEET
NSN 2010-00-294-1659Government record, cited

Shaft, Propulsion, Ship2010-00-294-1659

NSN 2010-00-294-1659 · NIIN 002941659
FSC 2010 — Ship and Boat Propulsion Components · FSG 20 — Ship and Marine Equipment
Government record, cited
Also searched as  2010-00-294-1659 · 2010002941659 · NIIN 002941659 · 00-294-1659 · FSC 2010 Ship and Boat Propulsion Components
Nearby stock numbers  ·
Features
  • Shaft,propulsion,ship — FSC 2010
  • Forward End Coupling Design: INTEGRAL
  • Taper: 1.500 PER FOOT IN INCHES NOMINAL
  • Forward Bearing Sleeve Length: 4.667 FEET NOMINAL FT
  • Surface Finish: SMOOTH MACHINED
  • After End Design: TAPERED
  • Quantity: 2
  • Forward End Coupling Thickness: 3.500 INCHES NOMINAL IN
Identification
  • NSN: 2010-00-294-1659
  • NIIN: 002941659
  • FSC: 2010 — Ship and Boat Propulsion Components
  • FSG: 20 — Ship and Marine Equipment
General Description

The Shaft,propulsion,ship, cataloged under National Stock Number 2010-00-294-1659, is classified within Federal Supply Class 2010 (Ship and Boat Propulsion Components) of the Ship and Marine Equipment group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN2010-00-294-1659
Item NameShaft,propulsion,ship
FSC / FSG2010 / 20 — Ship and Boat Propulsion Components
StatusACTIVE
Forward End Coupling DesignINTEGRAL
Taper1.500 PER FOOT IN INCHES NOMINAL
Forward Bearing Sleeve Length4.667 FEET NOMINAL FT
Surface FinishSMOOTH MACHINED
After End DesignTAPERED
Quantity2
Forward End Coupling Thickness3.500 INCHES NOMINAL IN
Material Document and ClassificationMIL-S-890, CLASS AN MIL SPEC SINGLE MATERIAL RESPONSE
Outside Diameter17.750 INCHES NOMINAL IN
Forward End Coupling Length0.688 FEET NOMINAL FT
Thread Length9.0000 INCHES IN
Taper Major Diameter17.750 INCHES NOMINAL IN
Forward Bearing Sleeve Outside Diameter19.375 INCHES NOMINAL IN
Covering LocationALL EXPOSED SURFACES COVERED
Forward End Coupling Outside Diameter28.5000 INCHES NOMINAL IN
Inside Diameter10.500 INCHES NOMINAL IN
After Bearing Sleeve Outside Diameter19.375 INCHES NOMINAL IN
Taper Length3.802 FEET NOMINAL FT
Protective Covering TypeRUBBER
Unit TypePROPELLER SHAFT SECTION
Depth1.531 INCHES NOMINAL IN
Width3.125 INCHES MINIMUM AND 3.188 INCHES MAXIMUM IN
MaterialSTEEL
Usage DesignSUITABLE FOR DD931-933,936-938,940-944 VESSELS
After Bearing Sleeve Length7.250 FEET NOMINAL FT
Major Diameter8.5000 INCHES NOMINAL IN
Furnished Items and QuantityPROPELLER NUT,1; PROPELLER KEY,2
Thread Quantity4 PER INCH
ConstructionHOLLOW
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
DD931S4301-1375311PC101 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 2010 — Ship and Boat Propulsion Components
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
2010-00-001-0005
SHAFT,PROPULSION,SHIP
2010-00-001-1564
BRAKE ELEMENT ASSEM
2010-00-001-1564
BRAKE ELEMENT ASSEM
2010-00-001-1565
CLUTCH ELEMENT ASSE
2010-00-001-1634
2010-00-001-1634 · Item name not on file
2010-00-001-1635
2010-00-001-1635 · Item name not on file
2010-00-001-1636
2010-00-001-1636 · Item name not on file
2010-00-001-1637
2010-00-001-1637 · Item name not on file

Frequently Asked Questions

What is NSN 2010-00-294-1659?

NSN 2010-00-294-1659 is a Shaft,propulsion,ship, classified under FSC 2010, Ship and Boat Propulsion Components. Status: active.

What are the specifications of 2010-00-294-1659?

Key specifications for 2010-00-294-1659: Forward End Coupling Design: INTEGRAL; Taper: 1.500 PER FOOT IN INCHES NOMINAL; Forward Bearing Sleeve Length: 4.667 FEET NOMINAL FT; Surface Finish: SMOOTH MACHINED. 29 specifications are documented in the U.S. Government catalog.

Is NSN 2010-00-294-1659 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com