PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 201-123
201-123 ✓ Verified by PartsTable
Hama · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

- High-quality materials and workmanship guarantee excellent transmission quality. Key specifications include overall_length: 5.500 INCHES NOMINAL IN, special_features: 1/2 FINE TIP FOR PLACING ELASTIC LIGATURES; NON-SLIP GRIP, design_designation: MATHIEU, part_name_assigned_by_controlling_agency: MATHIEU PLIERS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-073-2576, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
201-123
NSN: 3110-01-073-2576
FSC: 3110
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
overall_length5.500 INCHES NOMINAL IN
special_features1/2 FINE TIP FOR PLACING ELASTIC LIGATURES; NON-SLIP GRIP
design_designationMATHIEU
part_name_assigned_by_controlling_agencyMATHIEU PLIERS
NSN3110-01-073-2576
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 201-123 · Hama ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP E52100 OVERALL
•
RETAINER FABRICATION METHOD: PRESSED
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STANDOUT WIDTH: 0.1600 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.2200 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 2.5625 INCHES MINIMUM AND 2.5635 INCHES MAXIMUM IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 4
•
BACKFACE CORNER RADIUS: 0.0500 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP E52100 OVERALL
RETAINER FABRICATION METHODPRESSED
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STANDOUT WIDTH0.1600 INCHES NOMINAL IN
CONE CORNER RADIUS0.2200 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.5625 INCHES MINIMUM AND 2.5635 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 4
BACKFACE CORNER RADIUS0.0500 INCHES NOMINAL IN
BORE DIAMETER1.3750 INCHES MINIMUM AND 1.3758 INCHES MAXIMUM IN
OVERALL WIDTH1.9360 INCHES MINIMUM AND 1.9720 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
201123Interchangeable
interchangeable cross-reference
interchangeable
LCF-150-150Interchangeable
interchangeable cross-reference
interchangeable
20112-1Interchangeable
interchangeable cross-reference
interchangeable
20112-51511000Interchangeable
interchangeable cross-reference
interchangeable
20112-1VMInterchangeable
interchangeable cross-reference
interchangeable
8020130Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 201-123?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 201-123?
201-123 is a BEARING,ROLLER,TAPERED manufactured by Hama.
What parts can replace 201-123?
There are 11 known substitutes for 201-123: 201123, LCF-150-150, 20112-1 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 201-123?
201-123 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-073-2576. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 201-123

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026