PartsTable
Technical Data Sheet
Download PDF

200X5000-49 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

200X5000-49: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, outside_diameter: 0.176 INCHES NOMINAL IN, center_hole_diameter: 0.053 INCHES MINIMUM AND 0.059 INCHES MAXIMUM IN, cross-sectional_height: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-104-7957, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200X5000-49
NSN: 5331-00-104-7957
FSC: 5331 — O-ring
CAGE: 06473 — BUNKER RAMO CORP AMPHENOL NORTH AMERICAN DIV SAMS OPERATION (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
outside_diameter0.176 INCHES NOMINAL IN
center_hole_diameter0.053 INCHES MINIMUM AND 0.059 INCHES MAXIMUM IN
cross-sectional_height0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
NSN5331-00-104-7957
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200X5000-49 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.176 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.053 INCHES MINIMUM AND 0.059 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.176 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.053 INCHES MINIMUM AND 0.059 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
AS568B-003Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 200X5000-49?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200X5000-49?
200X5000-49 is a O-RING.
What parts can replace 200X5000-49?
There is 1 known substitute for 200X5000-49: AS568B-003. Substitute compatibility should be verified for your specific system.
What is the NSN for 200X5000-49?
200X5000-49 is cataloged in the U.S. Government catalog under NSN 5331-00-104-7957. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200X5000-49