PartsTable
Technical Data Sheet
Download PDF

200PH-10 — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

200PH-10: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 1.550 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN, material: STEEL HOLDER, load_rating: 10.0 POUNDS MAXIMUM LBS, flange_width: 2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN, flange_length: 2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN, inside_diameter: 0.386 INCHES MINIMUM AND 0.399 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-327-2131, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200PH-10
NSN: 5340-01-327-2131
FSC: 5340 — Hardware, Commercial
CAGE: 76005 — LORD CORPORATION DBA LORD CORP (USA)
SPECIFICATIONS
height1.550 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
materialSTEEL HOLDER
load_rating10.0 POUNDS MAXIMUM LBS
flange_width2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
flange_length2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
inside_diameter0.386 INCHES MINIMUM AND 0.399 INCHES MAXIMUM IN
flange_thickness0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
style_designatorROUND W/BUSHING FOUR-HOLE FLANGE
surface_treatmentCADMIUM HOLDER
specification/standard_data76005-200PH-10 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
flange_mounting_hole_diameter0.252 INCHES MINIMUM AND 0.262 INCHES MAXIMUM IN
distance_between_mounting_hole_centers2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM IN
NSN5340-01-327-2131
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200PH-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE MOUNTING HOLE DIAMETER: 0.252 INCHES MINIMUM AND 0.262 INCHES MAXIMUM IN
•
LOAD RATING: 10.0 POUNDS MAXIMUM LBS
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ROUND W/BUSHING FOUR-HOLE FLANGE
•
FLANGE LENGTH: 2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 76005-200PH-10 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
•
SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS: 2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FLANGE MOUNTING HOLE DIAMETER0.252 INCHES MINIMUM AND 0.262 INCHES MAXIMUM IN
LOAD RATING10.0 POUNDS MAXIMUM LBS
DISTANCE BETWEEN MOUNTING HOLE CENTERS2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM IN
FLANGE THICKNESS0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
STYLE DESIGNATORROUND W/BUSHING FOUR-HOLE FLANGE
FLANGE LENGTH2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA76005-200PH-10 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM IN
INSIDE DIAMETER0.386 INCHES MINIMUM AND 0.399 INCHES MAXIMUM IN
HEIGHT1.550 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 200PH-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200PH-10?
200PH-10 is a MOUNT,RESILIENT,UTILITY.
What is the NSN for 200PH-10?
200PH-10 is cataloged in the U.S. Government catalog under NSN 5340-01-327-2131. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200PH-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.