PartsTable
Technical Data Sheet
Download PDF

200KLFS56972 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

200KLFS56972: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.3934 INCHES MINIMUM AND 0.3937 INCHES MAXIMUM IN, overall_width: 0.5000 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-021-3533, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200KLFS56972
NSN: 3110-01-021-3533
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.3934 INCHES MINIMUM AND 0.3937 INCHES MAXIMUM IN
overall_width0.5000 INCHES NOMINAL IN
seal_quantity1
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.4800 INCHES NOMINAL IN
outer_ring_width0.3540 INCHES NOMINAL IN
special_featuresLUB 30 TO 50 PCT FULL
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeLABYRINTH
NSN3110-01-021-3533
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 200KLFS56972 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: LABYRINTH
•
OUTER RING WIDTH: 0.3540 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.1807 INCHES MINIMUM AND 1.1811 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPELABYRINTH
OUTER RING WIDTH0.3540 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.1807 INCHES MINIMUM AND 1.1811 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 1
200KLFS5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 200KLFS56972?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200KLFS56972?
200KLFS56972 is a BEARING,BALL,ANNULAR.
What parts can replace 200KLFS56972?
There is 1 known substitute for 200KLFS56972: 200KLFS5. Substitute compatibility should be verified for your specific system.
What is the NSN for 200KLFS56972?
200KLFS56972 is cataloged in the U.S. Government catalog under NSN 3110-01-021-3533. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200KLFS56972

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.