PartsTable
Technical Data Sheet
Download PDF

200CT — DEGAUSSER TAPE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

200CT: DEGAUSSER TAPE.

The DEGAUSSER TAPE is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL FLANGE, guide_type: EXTERNAL, joint_type: SINGLE, design_type: CORRUGATED ELEMENT, overall_length: 15.813 INCHES NOMINAL IN, bolt_hole_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-995-6214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 200CT
NSN: 4730-00-995-6214
NIINs: 009956214, 012145402
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 70876 — BATH IRON WORKS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL FLANGE
guide_typeEXTERNAL
joint_typeSINGLE
design_typeCORRUGATED ELEMENT
overall_length15.813 INCHES NOMINAL IN
sleeve_quantity1
bolt_hole_diameter0.750 INCHES NOMINAL IN
bolt_hole_quantity4
end_connection_typeFLANGED
bolt_circle_diameter4.750 INCHES NOMINAL IN
working_pressure_rating150.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
equalization_characteristicNONEQUALIZING
NSN4730-00-995-6214
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 200CT · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL PIPE SIZE DESIGNATION: 2.000 INCHES IN
•
DESIGN TYPE: CORRUGATED ELEMENT
•
EQUALIZATION CHARACTERISTIC: NONEQUALIZING
•
END CONNECTION TYPE: FLANGED
•
GUIDE TYPE: EXTERNAL
•
BOLT HOLE DIAMETER: 0.750 INCHES NOMINAL IN
•
WORKING PRESSURE RATING: 150.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
NOMINAL PIPE SIZE DESIGNATION2.000 INCHES IN
DESIGN TYPECORRUGATED ELEMENT
EQUALIZATION CHARACTERISTICNONEQUALIZING
END CONNECTION TYPEFLANGED
GUIDE TYPEEXTERNAL
BOLT HOLE DIAMETER0.750 INCHES NOMINAL IN
OVERALL LENGTH15.813 INCHES NOMINAL IN
WORKING PRESSURE RATING150.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
BOLT HOLE QUANTITY4
BOLT CIRCLE DIAMETER4.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 200CT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200CT?
200CT is a DEGAUSSER TAPE. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 200CT?
200CT is cataloged in the U.S. Government catalog under NSN 4730-00-995-6214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200CT

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.