PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 200AS104-8B085CR

200AS104-8B085CR — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,SPLINE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: SPLINE, nut_height: 0.323 INCHES NOMINAL IN, pilot_length: 0.085 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNJC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5310-00-596-7105, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200AS104-8B085CR
NSN: 5310-00-596-7105
FSC: 5310
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleSPLINE
nut_height0.323 INCHES NOMINAL IN
pilot_length0.085 INCHES NOMINAL IN
thread_class3B
thread_seriesUNJC
pilot_diameter0.277 INCHES NOMINAL IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.376 INCHES NOMINAL IN
nominal_thread_size0.164 INCHES IN
NSN5310-00-596-7105
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 200AS104-8B085CR · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
PILOT DIAMETER: 0.277 INCHES NOMINAL IN
•
NUT HEIGHT: 0.323 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
THREAD SERIES: UNJC
•
THREAD QUANTITY PER INCH: 32
•
THREAD CLASS: 3B
TECHNICAL CHARACTERISTICS
MATERIALSTEEL CORROSION RESISTING OVERALL
PILOT DIAMETER0.277 INCHES NOMINAL IN
NUT HEIGHT0.323 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
NOMINAL THREAD SIZE0.164 INCHES IN
THREAD SERIESUNJC
THREAD QUANTITY PER INCH32
THREAD CLASS3B
THREAD DIRECTIONRIGHT-HAND
WIDTH ACROSS FLATS0.376 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
4330PL1622938InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3033355InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
Z00.N7284510005TBMInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
261T1101InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
81-122InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
890523-2InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200AS104-8B085CR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200AS104-8B085CR?
200AS104-8B085CR is a NUT,SELF-LOCKING,SPLINE.
What parts can replace 200AS104-8B085CR?
There are 7 known substitutes for 200AS104-8B085CR: 4330PL1622938, 3033355, Z00.N7284510005TBM and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 200AS104-8B085CR?
200AS104-8B085CR is cataloged in the Federal Logistics Information System under NSN 5310-00-596-7105. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200AS104-8B085CR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026