PartsTable
Technical Data Sheet
Download PDF

20097-96C6D — BOLT,INTERNAL WRENCHING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

20097-96C6D: BOLT,INTERNAL WRENCHING.

The BOLT,INTERNAL WRENCHING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_height: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN, thread_length: 0.169 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN, fastener_length: 0.259 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-030-4646, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
20097-96C6D
NSN: 5306-01-030-4646
FSC: 5306 — Bolts
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_height0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
thread_length0.169 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN
fastener_length0.259 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.138 INCHES IN
NSN5306-01-030-4646
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 20097-96C6D · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.259 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.169 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN
HEAD HEIGHT0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
FASTENER LENGTH0.259 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.169 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.138 INCHES IN
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MINIMUM TENSILE STRENGTH190000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 1
37-037525-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 20097-96C6D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20097-96C6D?
20097-96C6D is a BOLT,INTERNAL WRENCHING.
What parts can replace 20097-96C6D?
There is 1 known substitute for 20097-96C6D: 37-037525-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 20097-96C6D?
20097-96C6D is cataloged in the U.S. Government catalog under NSN 5306-01-030-4646. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20097-96C6D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.