20097-7C-56 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

20097-7C-56: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 0.430 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN, thread_class: 3A A, chamfer_angle: 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM, head_diameter: 0.642 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-680-0619, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

20097-7C-56

NSN: 5305-01-680-0619
FSC: 5305 — Screws
CAGE: 71838 — SPS TECHNOLOGIES AFG DIV (USA)

SPECIFICATIONS

material	STEEL OVERALL
head_style	FLAT CHAMFER
head_height	0.430 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
thread_class	3A A
chamfer_angle	30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
head_diameter	0.642 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
thread_length	1.375 INCHES NOMINAL IN
fastener_length	3.50 INCHES NOMINAL IN
thread_direction	RIGHT-HAND
surface_treatment	OXIDE OVERALL
width_across_flats	0.375 INCHES NOMINAL IN
internal_drive_style	HEXAGON
NSN	5305-01-680-0619

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN

•

HEAD HEIGHT: 0.430 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN

•

FASTENER LENGTH: 3.50 INCHES NOMINAL IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-DTL-13924,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD LENGTH: 1.375 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

NOMINAL THREAD DIAMETER: 0.4375 INCHES IN

•

HEAD STYLE: FLAT CHAMFER

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.375 INCHES NOMINAL IN
HEAD HEIGHT	0.430 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
FASTENER LENGTH	3.50 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-DTL-13924,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH	1.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	FF-S-86 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER	0.4375 INCHES IN
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 2

NV1022979-47Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

S9515-A6-MMA-010 TBL 7-37-6Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 20097-7C-56?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 20097-7C-56?

20097-7C-56 is a SCREW,CAP,SOCKET HEAD.

What parts can replace 20097-7C-56?

There are 2 known substitutes for 20097-7C-56: NV1022979-47, S9515-A6-MMA-010 TBL 7-37-6. Substitute compatibility should be verified for your specific system.

What is the NSN for 20097-7C-56?

20097-7C-56 is cataloged in the U.S. Government catalog under NSN 5305-01-680-0619. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

20097-7C-56 — SCREW,CAP,SOCKET HEAD

Request a Quote — 20097-7C-56