20097-3F-6B — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

20097-3F-6B: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL UNS K03104 OVERALL, head_style: FLAT CHAMFER, head_height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, thread_length: 0.283 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-087-9735, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

20097-3F-6B

NSN: 5305-01-087-9735
FSC: 5305 — Screws
CAGE: 71838 — SPS TECHNOLOGIES AFG DIV (USA)

SPECIFICATIONS

material	STEEL UNS K03104 OVERALL
head_style	FLAT CHAMFER
head_height	0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_length	0.283 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
fastener_length	0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
hardness_rating	38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_direction	RIGHT-HAND
surface_treatment	OXIDE OVERALL
width_across_flats	0.156 INCHES NOMINAL IN
internal_drive_style	HEXAGON
NSN	5305-01-087-9735

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL IN

•

HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-1394 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD LENGTH: 0.283 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN

•

HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

NOMINAL THREAD DIAMETER: 0.190 INCHES IN

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.156 INCHES NOMINAL IN
HEAD HEIGHT	0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
FASTENER LENGTH	0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-1394 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH	0.283 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
HARDNESS RATING	38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES IN
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND

SUBSTITUTES & CROSS-REFERENCES 3

3001S04610003AUReference document

Same NSN cross-reference

Reference document — Secondary reference

3001S0461000AUReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

602-0006Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 20097-3F-6B?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 20097-3F-6B?

20097-3F-6B is a SCREW,CAP,SOCKET HEAD.

What parts can replace 20097-3F-6B?

There are 3 known substitutes for 20097-3F-6B: 3001S04610003AU, 3001S0461000AU, 602-0006. Substitute compatibility should be verified for your specific system.

What is the NSN for 20097-3F-6B?

20097-3F-6B is cataloged in the U.S. Government catalog under NSN 5305-01-087-9735. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

20097-3F-6B — SCREW,CAP,SOCKET HEAD

Request a Quote — 20097-3F-6B