PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 200819
200819 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include cover: PROVIDED, length: 17.500 INCHES NOMINAL IN, material: STEEL OVERALL, outside_diameter: 3.960 INCHES NOMINAL IN, special_features: SURFACE TREATMENT, OVERALL: OXIDE, style_designator: TEAR DROP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-8630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200819
NSN: 5315-00-010-8630
FSC: 5315
CAGE: 02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
coverPROVIDED
length17.500 INCHES NOMINAL IN
materialSTEEL OVERALL
outside_diameter3.960 INCHES NOMINAL IN
special_featuresSURFACE TREATMENT, OVERALL: OXIDE
style_designatorTEAR DROP
attachment_methodHOLE
heating_equipmentNOT INCLUDED
portability_methodHANDLE ON END
material_transparencyOPAQUE
mounting_hole_diameter2.750 INCHES MINIMUM AND 2.763 INCHES MAXIMUM IN
distance_from_mounting_hole_center_to_end_of_pointer15.900 INCHES NOMINAL IN
NSN5315-00-010-8630
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 200819 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 4 CLASS
•
MATERIAL: STEEL OVERALL
•
DIAMETER: 0.125 INCHES NOMINAL IN
•
UNDERLOOP LENGTH: 0.875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAB TYPE AND 4 CLASS
MATERIALSTEEL OVERALL
DIAMETER0.125 INCHES NOMINAL IN
UNDERLOOP LENGTH0.875 INCHES NOMINAL IN
STYLE DESIGNATORSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
103326Interchangeable
interchangeable cross-reference
interchangeable
MS35338-13Interchangeable
interchangeable cross-reference
interchangeable
130MAW1Interchangeable
interchangeable cross-reference
interchangeable
X-113Interchangeable
interchangeable cross-reference
interchangeable
F2647Interchangeable
interchangeable cross-reference
interchangeable
1619280Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200819?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200819?
200819 is a FILTER,RADIO FREQUENCY INTERFERE.
What parts can replace 200819?
There are 24 known substitutes for 200819: 103326, MS35338-13, 130MAW1 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 200819?
200819 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-8630. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200819

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026