2008-000 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

2008-000: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: RESIN EPOXY, body_style: CYLINDRICAL SERVO MOUNTED, body_length: 0.980 INCHES NOMINAL IN, shaft_style: ROUND, bearing_type: BALL SHAFT, pilot_length: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-755-5306, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 2008-000

NSN: 5905-00-755-5306
NIINs: 007555306, 011666639, 015283094, 016854845
FSC: 5905 — Resistor
CAGE: 02111 — VISHAY SPRAGUE INC (USA)

SPECIFICATIONS

material	RESIN EPOXY
body_style	CYLINDRICAL SERVO MOUNTED
body_length	0.980 INCHES NOMINAL IN
shaft_style	ROUND
bearing_type	BALL SHAFT
pilot_length	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
shaft_length	0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
shaft_runout	0.003 INCHES IN
actuator_type	DOUBLE ENDED SHAFT
body_diameter	1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM IN
curing_method	HEAT
physical_form	SEMIPASTE AND LIQUID
NSN	5905-00-755-5306

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 1.20 INCH-OUNCES IN

•

BODY DIAMETER: 1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM IN

•

LATERAL RUNOUT: 0.001 INCHES IN

•

ELECTRICAL RESISTANCE PER SECTION: 10.0 KILOHMS SINGLE SECTION

•

MOUNTING LIP DEPTH: 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 90.0 SINGLE SECTION

•

UNDERCUT WIDTH: 0.0730 INCHES MINIMUM IN

•

SECTION QUANTITY: 1

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	1.20 INCH-OUNCES IN
BODY DIAMETER	1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM IN
LATERAL RUNOUT	0.001 INCHES IN
ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
MOUNTING LIP DEPTH	0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	90.0 SINGLE SECTION
UNDERCUT WIDTH	0.0730 INCHES MINIMUM IN
SECTION QUANTITY	1
SHAFT DIAMETER	0.250 INCHES NOMINAL IN
UNDERCUT DIAMETER	1.561 INCHES MINIMUM AND 1.562 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 4

9170396Reference document

Same NSN cross-reference

Reference document — Secondary reference

240-1230P1Reference document

Same NSN cross-reference

Reference document — Secondary reference

5439-45-0Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

55-150-029Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 2008-000?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2008-000?

2008-000 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).

What parts can replace 2008-000?

There are 4 known substitutes for 2008-000: 9170396, 240-1230P1, 5439-45-0 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2008-000?

2008-000 is cataloged in the U.S. Government catalog under NSN 5905-00-755-5306. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2008-000 — RESISTOR,VARIABLE,WIRE WOUND,PRE

Request a Quote — 2008-000