PartsTable
Technical Data Sheet
Download PDF

2007475 — EYE HOOK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2007475: EYE HOOK.

The EYE HOOK is a the manufacturer industrial component. Key specifications include shape: OVAL, supplementary_features: 3/4" EYE SNAP BOLT SWIVEL TYPE, SNAP, SWIVEL BOLT, 3/4 INCH OVAL, W/RUSTPROOF SPRING, RADIUS ON SWIVEL IN, end_item_identification: 2320-01-529-2249, TRUCK, BOMB SERVICE, mounting_facility_diameter: 0.750 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: SNAP BOLT 3/4 INCH EYE SWIVEL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-551-6221, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2007475
NSN: 5340-01-551-6221
FSC: 5340 — Hardware, Commercial
CAGE: 1EFH8 — GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. DBA GDLS DIV GDLS-FP (USA)
SPECIFICATIONS
shapeOVAL
supplementary_features3/4" EYE SNAP BOLT SWIVEL TYPE, SNAP, SWIVEL BOLT, 3/4 INCH OVAL, W/RUSTPROOF SPRING, RADIUS ON SWIVEL IN
end_item_identification2320-01-529-2249, TRUCK, BOMB SERVICE
mounting_facility_diameter0.750 INCHES NOMINAL IN
mounting_facility_quantity1
part_name_assigned_by_controlling_agencySNAP BOLT 3/4 INCH EYE SWIVEL IN
NSN5340-01-551-6221
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2007475 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.750 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 1
•
SUPPLEMENTARY FEATURES: 3/4" EYE SNAP BOLT SWIVEL TYPE, SNAP, SWIVEL BOLT, 3/4 INCH OVAL, W/RUSTPROOF SPRING, RADIUS ON SWIVEL IN
•
SHAPE: OVAL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.750 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY1
SUPPLEMENTARY FEATURES3/4" EYE SNAP BOLT SWIVEL TYPE, SNAP, SWIVEL BOLT, 3/4 INCH OVAL, W/RUSTPROOF SPRING, RADIUS ON SWIVEL IN
SHAPEOVAL
PART NAME ASSIGNED BY CONTROLLING AGENCYSNAP BOLT 3/4 INCH EYE SWIVEL IN
END ITEM IDENTIFICATION2320-01-529-2249, TRUCK, BOMB SERVICE
SUBSTITUTES & CROSS-REFERENCES 1
2972Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2007475?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2007475?
2007475 is a EYE HOOK.
What parts can replace 2007475?
There is 1 known substitute for 2007475: 2972. Substitute compatibility should be verified for your specific system.
What is the NSN for 2007475?
2007475 is cataloged in the U.S. Government catalog under NSN 5340-01-551-6221. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2007475