PartsTable
Technical Data Sheet
Download PDF

2007033-1 — WASHER,SHOULDERED AND RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2007033-1: WASHER,SHOULDERED AND RECESSED.

The WASHER,SHOULDERED AND RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4330 OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.385 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN, shoulder_height: 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, outside_diameter: 1.562 INCHES NOMINAL IN, special_features: ITEM IS F-16 LANDING GEAR SPECIFIC. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-263-0855, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2007033-1
NSN: 5310-01-263-0855
FSC: 5310 — Nuts and Washers
CAGE: 6K4C8 — GOODRICH CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4330 OVERALL
recess_angle90.0 DEGREES NOMINAL
hole_diameter0.385 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN
shoulder_height0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
outside_diameter1.562 INCHES NOMINAL IN
special_featuresITEM IS F-16 LANDING GEAR SPECIFIC
shoulder_diameter1.202 INCHES MINIMUM AND 1.203 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
material_thickness0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
minimum_tensile_strength220000 POUNDS PER SQUARE INCH LBS
criticality_code_justificationFEAT
material_document_and_classificationAMS 6411 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-263-0855
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2007033-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MM 5542,CAGEC 17576 MFR REF SINGLE TREATMENT RESPONSE OR MM 4951,TY 2,CL 1,CAGEC 17576 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
SHOULDER HEIGHT: 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6411 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.562 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
SHOULDER DIAMETER: 1.202 INCHES MINIMUM AND 1.203 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMM 5542,CAGEC 17576 MFR REF SINGLE TREATMENT RESPONSE OR MM 4951,TY 2,CL 1,CAGEC 17576 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SHOULDER HEIGHT0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONFEAT
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6411 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.562 INCHES NOMINAL IN
MATERIAL THICKNESS0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SHOULDER DIAMETER1.202 INCHES MINIMUM AND 1.203 INCHES MAXIMUM IN
SPECIAL FEATURESITEM IS F-16 LANDING GEAR SPECIFIC
SURFACE TREATMENTCADMIUM OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
5310PL0787256Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2007033-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2007033-1?
2007033-1 is a WASHER,SHOULDERED AND RECESSED.
What parts can replace 2007033-1?
There is 1 known substitute for 2007033-1: 5310PL0787256. Substitute compatibility should be verified for your specific system.
What is the NSN for 2007033-1?
2007033-1 is cataloged in the U.S. Government catalog under NSN 5310-01-263-0855. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2007033-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.