PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 200633
200633 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- High-speed data transfer of up to 480 Mbps<br>- Double shielding for good reduction of electromagnetic interference<br>- Slimline plug is especially ideal for mobile and flat devices or when space is limited<br>- Flexible materials guarantee optimum kink protection and prevent cable breakage<br>- High-quality materials and workmanship guarantee excellent transmission quality This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-8970, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200633
NSN: 5330-00-291-8970
FSC: 5330
CAGE: 63728 — SEALCRAFT CORPORATION (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
hole_diameter0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter2.780 INCHES NOMINAL IN
aperture_diameter2.000 INCHES NOMINAL IN
bolt_circle_diameter2.360 INCHES NOMINAL IN
cross-sectional_thickness0.0025 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-291-8970
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200633 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE DIAMETER: 2.780 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.0025 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 2.360 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE OVERALL
•
APERTURE DIAMETER: 2.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE DIAMETER2.780 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL THICKNESS0.0025 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER2.360 INCHES NOMINAL IN
MATERIALPAPER AND GLUE OVERALL
APERTURE DIAMETER2.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
67397Interchangeable
interchangeable cross-reference
interchangeable
A-A-478Interchangeable
interchangeable cross-reference
interchangeable
5171139Interchangeable
interchangeable cross-reference
interchangeable
9171473-9Interchangeable
interchangeable cross-reference
interchangeable
200633Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200633?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200633?
200633 is a TRANSFORMER,POWER manufactured by Hama.
What parts can replace 200633?
There are 5 known substitutes for 200633: 67397, A-A-478, 5171139 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 200633?
200633 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-8970. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200633

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026