PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2005T30P01
2005T30P01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN, overall_length: 2.120 INCHES MINIMUM AND 2.140 INCHES MAXIMUM IN, aperture_diameter: 0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, outside_corner_radius: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-728-3425, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2005T30P01
NSN: 5330-00-728-3425
FSC: 5330
CAGE: 99207 — GENERAL ELECTRIC COMPANY DBA GE AEROSPACE (USA)
SPECIFICATIONS
materialASBESTOS AND STEEL CORROSION RESISTING OVERALL
hole_diameter0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
overall_length2.120 INCHES MINIMUM AND 2.140 INCHES MAXIMUM IN
aperture_diameter0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
outside_corner_radius0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
cross-sectional_thickness0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL WITH SOFT FILLER
outside_edge_to_bolt_hole_center_distance_along_length0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_length1.700 INCHES MINIMUM AND 1.720 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-728-3425
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2005T30P01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: METAL WITH SOFT FILLER
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.700 INCHES MINIMUM AND 1.720 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
MATERIAL: ASBESTOS AND STEEL CORROSION RESISTING OVERALL
•
APERTURE DIAMETER: 0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEMETAL WITH SOFT FILLER
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.700 INCHES MINIMUM AND 1.720 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH2.120 INCHES MINIMUM AND 2.140 INCHES MAXIMUM IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
MATERIALASBESTOS AND STEEL CORROSION RESISTING OVERALL
APERTURE DIAMETER0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
HOLE DIAMETER0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
50058Interchangeable
interchangeable cross-reference
interchangeable
50058-0Interchangeable
interchangeable cross-reference
interchangeable
850058Interchangeable
interchangeable cross-reference
interchangeable
72-6970-014Interchangeable
interchangeable cross-reference
interchangeable
1204Interchangeable
interchangeable cross-reference
interchangeable
MILR5521Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2005T30P01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2005T30P01?
2005T30P01 is a GASKET.
What parts can replace 2005T30P01?
There are 15 known substitutes for 2005T30P01: 50058, 50058-0, 850058 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2005T30P01?
2005T30P01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-728-3425. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2005T30P01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026