PartsTable
Technical Data Sheet
Download PDF

2005A055 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2005A055: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.250 INCHES NOMINAL IN, hole_diameter: 0.656 INCHES NOMINAL IN, overall_diameter: 3.500 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-535-7350, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2005A055
NSN: 5310-01-535-7350
FSC: 5310 — Nuts and Washers
CAGE: 33SR4 — MAINTENANCE CENTER ALBANY OF MARINE CORPS LOGISTICS COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.250 INCHES NOMINAL IN
hole_diameter0.656 INCHES NOMINAL IN
overall_diameter3.500 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification2510-01-525-2652 KIT ASSEMBLY, PERIMETER W/UNDERCARRIAGE ARMOR, MAK 2-DOOR, HMMWV
cross-sectional_shape_styleRECTANGULAR
part_name_assigned_by_controlling_agencyWASHER, REAR FENDER ISOLATOR, MAK, HMMWV
NSN5310-01-535-7350
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2005A055 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 3.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.656 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER3.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER, REAR FENDER ISOLATOR, MAK, HMMWV
END ITEM IDENTIFICATION2510-01-525-2652 KIT ASSEMBLY, PERIMETER W/UNDERCARRIAGE ARMOR, MAK 2-DOOR, HMMWV
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.656 INCHES NOMINAL IN
THICKNESS0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2005A055?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2005A055?
2005A055 is a WASHER,FLAT.
What is the NSN for 2005A055?
2005A055 is cataloged in the U.S. Government catalog under NSN 5310-01-535-7350. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2005A055

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.