PartsTable
Technical Data Sheet
PartsTable / MRO / 2005-43
2005-43 ✓ Verified by PartsTable
Braun · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include color: RED LENS, material: PLASTIC POLYCARBONATE LENS, body_style: CYLINDRICAL SERVO MOUNTED, body_length: 0.880 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: BALL SHAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-072-6115, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2005-43
NSN: 5330-00-072-6115
FSC: 5330
CAGE: 81876 — LA FAVORITE INDUSTRIES INC. (USA)
SPECIFICATIONS
colorRED LENS
materialPLASTIC POLYCARBONATE LENS
body_styleCYLINDRICAL SERVO MOUNTED
body_length0.880 INCHES MAXIMUM IN
shaft_styleROUND
bearing_typeBALL SHAFT
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.561 INCHES NOMINAL IN
shaft_runout0.002 INCHES IN
actuator_typeDOUBLE ENDED SHAFT
body_diameter1.750 INCHES MAXIMUM IN
alignment_typeRIGID
NSN5330-00-072-6115
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2005-43 MFR: Braun ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESUSED ON ACFT HYDR SYS & COMPT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
200543Interchangeable
interchangeable cross-reference
interchangeable
121515R92Interchangeable
interchangeable cross-reference
interchangeable
2005-11Interchangeable
interchangeable cross-reference
interchangeable
121515R91Interchangeable
interchangeable cross-reference
interchangeable
1225962Interchangeable
interchangeable cross-reference
interchangeable
67-135Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2005-43?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2005-43?
2005-43 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by Braun. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2005-43?
There are 7 known substitutes for 2005-43: 200543, 121515R92, 2005-11 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2005-43?
2005-43 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-072-6115. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2005-43

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026