The 200413191-01 is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OR STEEL COMP 301 OR STEEL COMP 302, construction: ONE-PIECE, hole_diameter: 0.195 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN, overall_width: 1.75 INCHES NOMINAL IN, overall_length: 1.75 INCHES NOMINAL IN, special_features: ALONG THE TOP EDGE THERE IS A 0.78 WIDE AND 0.125 DEEP CUT OUT CENTERALLY LOCATED ALONG THE TOP EDGE. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-00-536-9990, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL CORROSION RESISTING OR STEEL COMP 301 OR STEEL COMP 302 |
| construction | ONE-PIECE |
| hole_diameter | 0.195 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN |
| overall_width | 1.75 INCHES NOMINAL IN |
| overall_length | 1.75 INCHES NOMINAL IN |
| special_features | ALONG THE TOP EDGE THERE IS A 0.78 WIDE AND 0.125 DEEP CUT OUT CENTERALLY LOCATED ALONG THE TOP EDGE |
| style_designator | NON-CIRCULAR W/BOLT HOLES |
| aperture_diameter | 1.328 INCHES NOMINAL IN |
| overall_thickness | 0.010 INCHES NOMINAL IN |
| surface_treatment | PASSIVATE |
| bolt_hole_quantity | 4 |
| outside_corner_radius | 0.25 INCHES NOMINAL IN |
| NSN | 5365-00-536-9990 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.250 INCHES NOMINAL IN |
| OUTSIDE CORNER RADIUS | 0.25 INCHES NOMINAL IN |
| OVERALL THICKNESS | 0.010 INCHES NOMINAL IN |
| OVERALL LENGTH | 1.75 INCHES NOMINAL IN |
| MATERIAL | STEEL CORROSION RESISTING OR STEEL COMP 301 OR STEEL COMP 302 |
| STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
| APERTURE DIAMETER | 1.328 INCHES NOMINAL IN |
| CONSTRUCTION | ONE-PIECE |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A480 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A666 301/302 1/2 HARD THRU FULL HARD ASSN STD SINGLE MATERIAL RESPONSE |
| SPECIAL FEATURES | ALONG THE TOP EDGE THERE IS A 0.78 WIDE AND 0.125 DEEP CUT OUT CENTERALLY LOCATED ALONG THE TOP EDGE |