PartsTable
Technical Data Sheet
PartsTable / MRO / 200379
200379 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SANDBAG SET,CERVICAL,X-RAY is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, overall_width: 5.940 INCHES NOMINAL IN, aperture_diameter: 3.590 INCHES NOMINAL IN, bolt_circle_diameter: 5.000 INCHES NOMINAL IN, outside_corner_radius: 0.470 INCHES NOMINAL IN, end_item_identification: MODEL RC 5000MIL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-290-8525, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 200379
NSN: 5330-00-290-8525
FSC: 5330
CAGE: 63728 — SEALCRAFT CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
overall_width5.940 INCHES NOMINAL IN
special_featuresBRAND NAME DESCRIPTION AQ1 - 12 GAUGE;ADDITIONAL ITEM INFORMATION AQ1 26-1/2 X 19-5/16 X .012,R;REQUIRED MINIMUM ORDER QUANTITY 1;REQUIRED MULTIPLE ORDER QUANTITY 1
aperture_diameter3.590 INCHES NOMINAL IN
bolt_circle_diameter5.000 INCHES NOMINAL IN
outside_corner_radius0.470 INCHES NOMINAL IN
end_item_identificationMODEL RC 5000MIL
cross-sectional_thickness0.013 INCHES NOMINAL IN
largest_bolt_hole_diameter0.220 INCHES NOMINAL IN
cross-sectional_shape_styleROUND
smallest_bolt_hole_diameter0.080 INCHES NOMINAL IN
side_radius_from_gasket_center2.250 INCHES NOMINAL IN
NSN5330-00-290-8525
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200379 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.013 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
SMALLEST BOLT HOLE DIAMETER: 0.080 INCHES NOMINAL IN
•
LARGEST BOLT HOLE DIAMETER: 0.220 INCHES NOMINAL IN
•
APERTURE DIAMETER: 3.590 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. G-1122 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.013 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
SMALLEST BOLT HOLE DIAMETER0.080 INCHES NOMINAL IN
LARGEST BOLT HOLE DIAMETER0.220 INCHES NOMINAL IN
OVERALL WIDTH5.940 INCHES NOMINAL IN
APERTURE DIAMETER3.590 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. G-1122 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
OUTSIDE CORNER RADIUS0.470 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER5.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
23079Interchangeable
interchangeable cross-reference
interchangeable
577C659Interchangeable
interchangeable cross-reference
interchangeable
577C659P9Interchangeable
interchangeable cross-reference
interchangeable
DMS 81015BInterchangeable
interchangeable cross-reference
interchangeable
2224892Interchangeable
interchangeable cross-reference
interchangeable
10438Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200379?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200379?
200379 is a SANDBAG SET,CERVICAL,X-RAY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 200379?
There are 10 known substitutes for 200379: 23079, 577C659, 577C659P9 and 7 more. Substitute compatibility should be verified for your specific system.
Is 200379 still available?
200379 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200379

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026