PartsTable
Technical Data Sheet
Download PDF

2002A — FILTER,RADIO FREQUENCY INTERFERE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2002A: FILTER,RADIO FREQUENCY INTERFERE.

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include angle: 14.0 DEGREES NOMINAL, material: RUBBER SYNTHETIC OVERALL, head_type: STRAIGHT, seat_type: BALL, point_type: REGULAR BENT, seat_radius: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-421-7073, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2002A
NSN: 4730-00-421-7073
NIINs: 004217073, 005812651, 005996429, 010236817, 013708845, 014080998, 015183021
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 93061 — PARKER-HANNIFIN CORP DIV FLUID SYSTEM CONNECTOR DIVISION (USA)
SPECIFICATIONS
angle14.0 DEGREES NOMINAL
materialRUBBER SYNTHETIC OVERALL
head_typeSTRAIGHT
seat_typeBALL
point_typeREGULAR BENT
seat_radius0.375 INCHES NOMINAL IN
thread_size1/4-18
body_materialMETAL
overall_width1.630 INCHES NOMINAL IN
inclosure_typeHERMETICALLY SEALED
overall_height0.926 INCHES NOMINAL IN
overall_length2.438 INCHES NOMINAL IN
NSN4730-00-421-7073
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 2002A · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNION OUTSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
END CONNECTION TYPE: THREADED
•
SEAT TYPE: BALL
•
THREAD DIRECTION: RIGHT-HAND
•
SEAT RADIUS: 0.375 INCHES NOMINAL IN
•
THREAD SIZE: 1/4-18
•
SCREW THREAD SERIES DESIGNATOR: NPT
TECHNICAL CHARACTERISTICS
UNION OUTSIDE DIAMETER1.750 INCHES NOMINAL IN
END CONNECTION TYPETHREADED
OVERALL LENGTH2.438 INCHES NOMINAL IN
SEAT TYPEBALL
THREAD DIRECTIONRIGHT-HAND
SEAT RADIUS0.375 INCHES NOMINAL IN
THREAD SIZE1/4-18
SCREW THREAD SERIES DESIGNATORNPT
SCREW THREAD LOCATIONINTERNAL
MATERIALCOPPER ALLOY
SUBSTITUTES & CROSS-REFERENCES 1
2002ABReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2002A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2002A?
2002A is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2002A?
There is 1 known substitute for 2002A: 2002AB. Substitute compatibility should be verified for your specific system.
What is the NSN for 2002A?
2002A is cataloged in the U.S. Government catalog under NSN 4730-00-421-7073. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2002A