PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 200212
200212 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL COMP 1050 OVERALL, joint_type: SCARF-PERIPHERAL RETAINER, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, flute_length: 11.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-080-9142, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200212
NSN: 5330-00-080-9142
FSC: 5330
CAGE: 97928 — HUCK INTL INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 OVERALL
joint_typeSCARF-PERIPHERAL RETAINER
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length11.250 INCHES NOMINAL IN
hole_diameter0.377 INCHES MINIMUM AND 0.377 INCHES MINIMUM AND 0.391 INCHES MAXIMUM0.391 INCHES MAXIMUM IN
flute_quantity2
overall_length0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length0.500 INCHES MINIMUM IN
outside_diameter0.493 INCHES MINIMUM AND 0.493 INCHES MINIMUM AND 0.507 INCHES MAXIMUM0.507 INCHES MAXIMUM IN
NSN5330-00-080-9142
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200212 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC OVERALL
•
CENTER HOLE DIAMETER: 0.312 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.052 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
PERIPHERAL DIAMETER: 0.410 INCHES NOMINAL IN
•
JOINT TYPE: SCARF-PERIPHERAL RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC OVERALL
CENTER HOLE DIAMETER0.312 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.052 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
PERIPHERAL DIAMETER0.410 INCHES NOMINAL IN
JOINT TYPESCARF-PERIPHERAL RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
2410 2-1/2Interchangeable
interchangeable cross-reference
interchangeable
42-10266Interchangeable
interchangeable cross-reference
interchangeable
20232Interchangeable
interchangeable cross-reference
interchangeable
200363Interchangeable
interchangeable cross-reference
interchangeable
200212Interchangeable
interchangeable cross-reference
interchangeable
107003-127Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200212?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200212?
200212 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 200212?
There are 8 known substitutes for 200212: 2410 2-1/2, 42-10266, 20232 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 200212?
200212 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-080-9142. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200212

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026