200113ADPC428 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

200113ADPC428: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL UNS K15590 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, stock_diameter: 0.109 INCHES NOMINAL IN, inside_diameter: 0.562 INCHES NOMINAL IN, style_designator: CYLINDRICAL, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-967-4838, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

200113ADPC428

NSN: 5360-00-967-4838
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 0UBG9 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV EPD (USA)

SPECIFICATIONS

material	STEEL UNS K15590 OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity	9
stock_diameter	0.109 INCHES NOMINAL IN
inside_diameter	0.562 INCHES NOMINAL IN
style_designator	CYLINDRICAL
surface_treatment	CADMIUM OVERALL
spring_free_length	1.750 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_deflection_rate	96.000 POUNDS PER INCH NOMINAL LBS
spring_free_outside_diameter	0.780 INCHES NOMINAL IN
spring_solid_outside_diameter	0.780 INCHES NOMINAL IN
NSN	5360-00-967-4838

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.780 INCHES NOMINAL IN

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

STYLE DESIGNATOR: CYLINDRICAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-412,COMP 1,TYPE 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 1.750 INCHES NOMINAL IN

•

SPRING DEFLECTION RATE: 96.000 POUNDS PER INCH NOMINAL LBS

•

INSIDE DIAMETER: 0.562 INCHES NOMINAL IN

•

STOCK DIAMETER: 0.109 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.780 INCHES NOMINAL IN
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATOR	CYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-412,COMP 1,TYPE 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	1.750 INCHES NOMINAL IN
SPRING DEFLECTION RATE	96.000 POUNDS PER INCH NOMINAL LBS
INSIDE DIAMETER	0.562 INCHES NOMINAL IN
STOCK DIAMETER	0.109 INCHES NOMINAL IN
SPRING SOLID OUTSIDE DIAMETER	0.780 INCHES NOMINAL IN
COIL QUANTITY	9

SUBSTITUTES & CROSS-REFERENCES 3

B4432-4Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

66208BReference document

Same NSN cross-reference

Reference document — Design control — primary reference

6208BReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 200113ADPC428?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 200113ADPC428?

200113ADPC428 is a SPRING,HELICAL,COMPRESSION.

What parts can replace 200113ADPC428?

There are 3 known substitutes for 200113ADPC428: B4432-4, 66208B, 6208B. Substitute compatibility should be verified for your specific system.

What is the NSN for 200113ADPC428?

200113ADPC428 is cataloged in the U.S. Government catalog under NSN 5360-00-967-4838. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

200113ADPC428 — SPRING,HELICAL,COMPRESSION

Request a Quote — 200113ADPC428