PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 200110APPC707
200110APPC707 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, outside_diameter: 6.843 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 6.468 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: RECTANGULAR METAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-051-4005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200110APPC707
NSN: 5330-00-051-4005
FSC: 5330
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
outside_diameter6.843 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter6.468 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR METAL
material_document_and_classificationQQ-C-576 SOFT ANNEALED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-051-4005
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200110APPC707 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 6.468 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 6.843 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
MATERIAL: COPPER ALLOY OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-576 SOFT ANNEALED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER6.468 INCHES NOMINAL IN
OUTSIDE DIAMETER6.843 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
MATERIALCOPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-576 SOFT ANNEALED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
SS-5824-2-27 K27Interchangeable
interchangeable cross-reference
interchangeable
515-B-4Interchangeable
interchangeable cross-reference
interchangeable
PR5515-1Interchangeable
interchangeable cross-reference
interchangeable
4528BInterchangeable
interchangeable cross-reference
interchangeable
4528BDMAInterchangeable
interchangeable cross-reference
interchangeable
4528BDMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200110APPC707?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200110APPC707?
200110APPC707 is a GASKET.
What parts can replace 200110APPC707?
There are 8 known substitutes for 200110APPC707: SS-5824-2-27 K27, 515-B-4, PR5515-1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 200110APPC707?
200110APPC707 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-051-4005. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200110APPC707

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026