PartsTable
Technical Data Sheet

2001 19/64 — FILTER,RADIO FREQUENCY INTERFERE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

2001 19/64: FILTER,RADIO FREQUENCY INTERFERE.

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 3.062 INCHES NOMINAL IN, overall_length: 4.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-228-1368, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2001 19/64
NSN: 5133-00-228-1368
NIINs: 002281368, 002408443
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 42970 — LEAR SIEGLER INC NATIONAL TWIST DRILL AND TOOL DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length3.062 INCHES NOMINAL IN
flute_quantity2
overall_length4.375 INCHES NOMINAL IN
shank_diameter0.296 INCHES NOMINAL IN
special_featuresJOBBERS LG; FRACTIONAL SIZE 19/64
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.2969 INCHES IN
cutting_rotation_directionRIGHT-HAND
NSN5133-00-228-1368
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available FILTER,RADIO FREQUENCY INTERFERE TITLE COMPONENT PN 2001 19/64 MFR FILTER,RADIO FREQUENCY
KEY FEATURES
•
CUTTING END STYLE: GENERAL PURPOSE
•
TAPER SHANK SIZE DESIGNATOR: 4 MORSE
•
FLUTE LENGTH: 8.625 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 1.2969 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SHANK STYLE: STANDARD TAPER W/TANG
TECHNICAL CHARACTERISTICS
CUTTING END STYLEGENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR4 MORSE
FLUTE LENGTH8.625 INCHES NOMINAL IN
OVERALL LENGTH14.250 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER1.2969 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLESTANDARD TAPER W/TANG
FLUTE QUANTITY2
SPECIAL FEATURESTAPER SHANK LG; FRACTIONAL SIZE 1-19/64
SUBSTITUTES & CROSS-REFERENCES 10
53183Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2410 1-19/64Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GGG-D-751Reference document
Same NSN cross-reference
Reference document — Secondary reference
25183Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
20119Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GGG-D-751 TYEReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 2001 19/64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2001 19/64?
2001 19/64 is a FILTER,RADIO FREQUENCY INTERFERE.
What parts can replace 2001 19/64?
There are 10 known substitutes for 2001 19/64: 53183, 2410 1-19/64, GGG-D-751 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2001 19/64?
2001 19/64 is cataloged in the U.S. Government catalog under NSN 5133-00-228-1368. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2001 19/64