PartsTable
Technical Data Sheet
Download PDF

2000642 — MIRROR HEAD,VEHICULAR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

2000642: MIRROR HEAD,VEHICULAR.

The MIRROR HEAD,VEHICULAR is a the manufacturer industrial component. Key specifications include end_item_identification: 2355-01-532-2174;JOINT EOD RAPID RESPONSE VEHICLE (JERRV), part_name_assigned_by_controlling_agency: MIRROR,REAR VIEW. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-281-3120, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2000642
NSN: 5305-00-281-3120
NIINs: 002813120, 015563201
FSC: 5305 — Screws
CAGE: 02145 — RICHARDS IMAGERY INTERPRETATION SYSTEMS, L.L.C. (USA)
SPECIFICATIONS
end_item_identification2355-01-532-2174;JOINT EOD RAPID RESPONSE VEHICLE (JERRV)
part_name_assigned_by_controlling_agencyMIRROR,REAR VIEW
NSN5305-00-281-3120
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2000642 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.093 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.187 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.187 INCHES MINIMUM IN
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.093 INCHES NOMINAL IN
FASTENER LENGTH0.187 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.187 INCHES MINIMUM IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLECUP
SURFACE TREATMENTPASSIVATE OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
43S90990-925Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-200Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
5305002813120Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS51031-46Reference document
Same NSN cross-reference
Reference document — Secondary reference
12Z1077PC17Reference document
Same NSN cross-reference
Reference document — Secondary reference
NAS1081C3D3Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2000642?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2000642?
2000642 is a MIRROR HEAD,VEHICULAR.
What parts can replace 2000642?
There are 8 known substitutes for 2000642: 43S90990-925, FF-S-200, 5305002813120 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2000642?
2000642 is cataloged in the U.S. Government catalog under NSN 5305-00-281-3120. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2000642

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.