PartsTable
Technical Data Sheet
Download PDF

200064 — MICROCIRCUIT,DIGITAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

200064: MICROCIRCUIT,DIGITAL.

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include height: 0.103 INCHES NOMINAL IN, diameter: 0.406 INCHES NOMINAL IN, material: ALUMINUM, body_width: 0.250 INCHES NOMINAL IN, body_height: 0.180 INCHES NOMINAL IN, body_length: 0.870 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-417-5800, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200064
NSN: 5340-00-417-5800
NIINs: 004175800, 008248904, 010421366, 013799205, 014593995
FSC: 5340 — Hardware, Commercial
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
height0.103 INCHES NOMINAL IN
diameter0.406 INCHES NOMINAL IN
materialALUMINUM
body_width0.250 INCHES NOMINAL IN
body_height0.180 INCHES NOMINAL IN
body_length0.870 INCHES NOMINAL IN
overall_width0.938 INCHES NOMINAL IN
outside_diameter0.713 INCHES NOMINAL IN
style_designatorCUP
tongue_hole_typeROUND, UNTHREADED
features_providedMONOLITHIC
output_logic_formTRANSISTOR-TRANSISTOR LOGIC
NSN5340-00-417-5800
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200064 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.406 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.625 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.125 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.406 INCHES NOMINAL IN
OVERALL WIDTH0.938 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.625 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.125 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER0.625 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
5340004175800Reference document
Same NSN cross-reference
Reference document — Secondary reference
65798Reference document
Same NSN cross-reference
Reference document — Secondary reference
10114531Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 200064?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200064?
200064 is a MICROCIRCUIT,DIGITAL.
What parts can replace 200064?
There are 3 known substitutes for 200064: 5340004175800, 65798, 10114531. Substitute compatibility should be verified for your specific system.
What is the NSN for 200064?
200064 is cataloged in the U.S. Government catalog under NSN 5340-00-417-5800. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200064

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.