PartsTable
Technical Data Sheet
Download PDF

200-722P1 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

200-722P1: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.125 INCHES NOMINAL IN, material: UNABLE TO DECODE, tongue_width: 0.937 INCHES NOMINAL IN, overall_width: 0.765 INCHES NOMINAL IN, tongue_length: 0.062 INCHES NOMINAL IN, overall_length: 1.437 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-042-9952, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200-722P1
NSN: 5340-01-042-9952
FSC: 5340 — Hardware, Commercial
CAGE: 52032 — BIOMARINE INC (USA)
SPECIFICATIONS
height0.125 INCHES NOMINAL IN
materialUNABLE TO DECODE
tongue_width0.937 INCHES NOMINAL IN
overall_width0.765 INCHES NOMINAL IN
tongue_length0.062 INCHES NOMINAL IN
overall_length1.437 INCHES NOMINAL IN
mounting_facilityUNTHREADED HOLE(S)
material_thickness0.062 INCHES NOMINAL IN
first_surface_hole_size0.130 INCHES NOMINAL IN
first_surface_hole_quantity2
NSN5340-01-042-9952
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200-722P1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 0.937 INCHES NOMINAL IN
•
FIRST SURFACE HOLE SIZE: 0.130 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
HEIGHT: 0.125 INCHES NOMINAL IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
TONGUE WIDTH0.937 INCHES NOMINAL IN
OVERALL LENGTH1.437 INCHES NOMINAL IN
OVERALL WIDTH0.765 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.130 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
HEIGHT0.125 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
MATERIALUNABLE TO DECODE
TONGUE LENGTH0.062 INCHES NOMINAL IN
FIRST SURFACE HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
B24D11003Reference document
Same NSN cross-reference
Reference document — Secondary reference
400-215-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
B24D11001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 200-722P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200-722P1?
200-722P1 is a STRIKE,CATCH.
What parts can replace 200-722P1?
There are 3 known substitutes for 200-722P1: B24D11003, 400-215-5, B24D11001. Substitute compatibility should be verified for your specific system.
What is the NSN for 200-722P1?
200-722P1 is cataloged in the U.S. Government catalog under NSN 5340-01-042-9952. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200-722P1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.