PartsTable
Technical Data Sheet
Download PDF

200-718-7 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

200-718-7: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: WATERTIGHT, head_height: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.306 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN, thread_length: 0.157 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, fastener_length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-433-3707, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200-718-7
NSN: 5305-00-433-3707
FSC: 5305 — Screws
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
head_styleWATERTIGHT
head_height0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.306 INCHES MINIMUM AND 0.347 INCHES MAXIMUM IN
thread_length0.157 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
fastener_length0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
special_featuresFURNISHED WITH ONE RUBBER 0-RING
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength75000 POUNDS PER SQUARE INCH LBS
NSN5305-00-433-3707
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 200-718-7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.157 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: WATERTIGHT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
THREAD LENGTH0.157 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEWATERTIGHT
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURESFURNISHED WITH ONE RUBBER 0-RING
MINIMUM TENSILE STRENGTH75000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 7
R8-32X1-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
722-031-304Reference document
Same NSN cross-reference
Reference document — Secondary reference
100-778P5BReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
HT08R3204Reference document
Same NSN cross-reference
Reference document — Secondary reference
5365004333707Reference document
Same NSN cross-reference
Reference document — Informative reference only
NT345S0832VC4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 200-718-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200-718-7?
200-718-7 is a SCREW,MACHINE.
What parts can replace 200-718-7?
There are 7 known substitutes for 200-718-7: R8-32X1-4, 722-031-304, 100-778P5B and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 200-718-7?
200-718-7 is cataloged in the U.S. Government catalog under NSN 5305-00-433-3707. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200-718-7