PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 200-2996-23L
200-2996-23L ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.703 INCHES NOMINAL IN, surface_treatment: ZINC CASE, housing_bore_diameter: 2.996 INCHES NOMINAL IN, sealing_element_style: ANGULAR-OPPOSED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-689-4084, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200-2996-23L
NSN: 5330-00-689-4084
FSC: 5330
CAGE: 5F893 — VANSEAL CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleSQUARE
seal_width0.703 INCHES NOMINAL IN
surface_treatmentZINC CASE
housing_bore_diameter2.996 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter2.000 INCHES NOMINAL IN
NSN5330-00-689-4084
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200-2996-23L MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT B
•
SURFACE TREATMENT: ZINC CASE
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.996 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
SURFACE TREATMENTZINC CASE
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR-OPPOSED
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.996 INCHES NOMINAL IN
SEAL WIDTH0.703 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
46894HInterchangeable
interchangeable cross-reference
interchangeable
5940PL1452104Interchangeable
interchangeable cross-reference
interchangeable
13KP849Interchangeable
interchangeable cross-reference
interchangeable
BACB20W1Interchangeable
interchangeable cross-reference
interchangeable
1998-1Interchangeable
interchangeable cross-reference
interchangeable
200-2996-22LInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200-2996-23L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200-2996-23L?
200-2996-23L is a SEAL,PLAIN ENCASED.
What parts can replace 200-2996-23L?
There are 6 known substitutes for 200-2996-23L: 46894H, 5940PL1452104, 13KP849 and 3 more. Substitute compatibility should be verified for your specific system.
Is 200-2996-23L still available?
200-2996-23L is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200-2996-23L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026