PartsTable
Technical Data Sheet
Download PDF

200-287-19L — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

200-287-19L: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OR STEEL CASE, case_style: RECESSED, seal_width: 0.594 INCHES NOMINAL IN, temp_rating: 200.0 FAHRENHEIT DEGF, surface_treatment: ZINC OR CHROMATE CASE, housing_bore_diameter: 2.879 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-576-3742, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200-287-19L
NSN: 5330-00-576-3742
NIINs: 005763742, 010626871
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OR STEEL CASE
case_styleRECESSED
seal_width0.594 INCHES NOMINAL IN
temp_rating200.0 FAHRENHEIT DEGF
surface_treatmentZINC OR CHROMATE CASE
housing_bore_diameter2.879 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter0.200 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-576-3742
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200-287-19L MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.594 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
HOUSING BORE DIAMETER: 2.879 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC CASE
•
MATERIAL: WOOL SEALING ELEMENT A
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.594 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL-ANGULAR
HOUSING BORE DIAMETER2.879 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
SURFACE TREATMENTZINC CASE
MATERIALWOOL SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
SUBSTITUTES & CROSS-REFERENCES 2
00044Reference document
Same NSN cross-reference
Reference document — Secondary reference
12Z9017-11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 200-287-19L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200-287-19L?
200-287-19L is a SEAL,PLAIN ENCASED.
What parts can replace 200-287-19L?
There are 2 known substitutes for 200-287-19L: 00044, 12Z9017-11. Substitute compatibility should be verified for your specific system.
What is the NSN for 200-287-19L?
200-287-19L is cataloged in the U.S. Government catalog under NSN 5330-00-576-3742. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200-287-19L

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.