PartsTable
Technical Data Sheet
PartsTable / O-RING / 200-279-4470
200-279-4470 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, outside_diameter: 13.262 INCHES NOMINAL IN, center_hole_diameter: 12.919 INCHES MINIMUM AND 13.049 INCHES MAXIMUM IN, cross-sectional_height: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-965-0662, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200-279-4470
NSN: 5331-00-965-0662
FSC: 5331 — O-RING
CAGE: Z5287 — INTERNATIONAL SEAL CO AUST PTY LTD (AUS)
SPECIFICATIONS
materialRUBBER SYNTHETIC
outside_diameter13.262 INCHES NOMINAL IN
center_hole_diameter12.919 INCHES MINIMUM AND 13.049 INCHES MAXIMUM IN
cross-sectional_height0.125 INCHES NOMINAL IN
NSN5331-00-965-0662
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200-279-4470 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 12.919 INCHES MINIMUM AND 13.049 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 13.262 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER12.919 INCHES MINIMUM AND 13.049 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER13.262 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
2279Interchangeable
interchangeable cross-reference
interchangeable
R5931-47Interchangeable
interchangeable cross-reference
interchangeable
3074-0001Interchangeable
interchangeable cross-reference
interchangeable
GA800GJ1Interchangeable
interchangeable cross-reference
interchangeable
125-415Interchangeable
interchangeable cross-reference
interchangeable
391 2881 137Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200-279-4470?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200-279-4470?
200-279-4470 is a O-RING.
What parts can replace 200-279-4470?
There are 15 known substitutes for 200-279-4470: 2279, R5931-47, 3074-0001 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 200-279-4470?
200-279-4470 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-965-0662. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200-279-4470

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026