PartsTable
Technical Data Sheet
PartsTable / O-RING / 200-2388-030
200-2388-030 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 16.150 INCHES MINIMUM AND 16.316 INCHES MAXIMUM IN, center_hole_diameter: 15.880 INCHES MINIMUM AND 16.030 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-122-5819, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200-2388-030
NSN: 5331-01-122-5819
FSC: 5331 — O-RING
CAGE: 13499 — ROCKWELL COLLINS, INC. DBA COLLINS AEROSPACE GOVERNMENT SYSTEMS DIV COLLINS AEROSPACE - GOVERNMENT SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter16.150 INCHES MINIMUM AND 16.316 INCHES MAXIMUM IN
center_hole_diameter15.880 INCHES MINIMUM AND 16.030 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-01-122-5819
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200-2388-030 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
CENTER HOLE DIAMETER: 15.880 INCHES MINIMUM AND 16.030 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 16.150 INCHES MINIMUM AND 16.316 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
ELONGATION PERCENTAGE331 MAXIMUM
CENTER HOLE DIAMETER15.880 INCHES MINIMUM AND 16.030 INCHES MAXIMUM IN
OUTSIDE DIAMETER16.150 INCHES MINIMUM AND 16.316 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
AS568B-282Interchangeable
interchangeable cross-reference
interchangeable
AS568-282Interchangeable
interchangeable cross-reference
interchangeable
A-A-59588 CL 1B GR40Interchangeable
interchangeable cross-reference
interchangeable
07-02282-0AInterchangeable
interchangeable cross-reference
interchangeable
2282Interchangeable
interchangeable cross-reference
interchangeable
TA13218E4002Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200-2388-030?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200-2388-030?
200-2388-030 is a O-RING.
What parts can replace 200-2388-030?
There are 20 known substitutes for 200-2388-030: AS568B-282, AS568-282, A-A-59588 CL 1B GR40 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 200-2388-030?
200-2388-030 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-122-5819. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200-2388-030

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026