PartsTable
Technical Data Sheet
Download PDF

200-2334-280 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

200-2334-280: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, center_hole_diameter: 11.454 INCHES MINIMUM AND 11.514 INCHES MAXIMUM IN, cross_section_outside_diameter: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-465-1356, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200-2334-280
NSN: 5330-01-465-1356
FSC: 5330 — Packing and Gasket Materials
CAGE: 13499 — ROCKWELL COLLINS, INC. DBA COLLINS AEROSPACE GOVERNMENT SYSTEMS DIV COLLINS AEROSPACE - GOVERNMENT SYSTEMS (USA)
SPECIFICATIONS
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
center_hole_diameter11.454 INCHES MINIMUM AND 11.514 INCHES MAXIMUM IN
cross_section_outside_diameter0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5330-01-465-1356
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200-2334-280 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CENTER HOLE DIAMETER: 11.454 INCHES MINIMUM AND 11.514 INCHES MAXIMUM IN
•
CROSS SECTION OUTSIDE DIAMETER: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
CENTER HOLE DIAMETER11.454 INCHES MINIMUM AND 11.514 INCHES MAXIMUM IN
CROSS SECTION OUTSIDE DIAMETER0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
200-2334Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 200-2334-280?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200-2334-280?
200-2334-280 is a PACKING,PREFORMED.
What parts can replace 200-2334-280?
There is 1 known substitute for 200-2334-280: 200-2334. Substitute compatibility should be verified for your specific system.
What is the NSN for 200-2334-280?
200-2334-280 is cataloged in the U.S. Government catalog under NSN 5330-01-465-1356. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200-2334-280

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.