PartsTable
Technical Data Sheet
PartsTable / MRO / 200-219
200-219 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, body_length: 1.380 INCHES NOMINAL IN, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 23.0 MILLIMETERS NOMINAL MM, rating_method: ELECTRICAL SINGLE COMPONENT SINGLE WINDING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5078, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 200-219
NSN: 3110-00-156-5078
FSC: 3110
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
body_length1.380 INCHES NOMINAL IN
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width23.0 MILLIMETERS NOMINAL MM
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
alignment_typeSELF-ALIGNING
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
load_directionANGULAR
surface_finishGROUND
mounting_methodTERMINAL SINGLE GROUP
NSN3110-00-156-5078
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 200-219 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: INWARD CONVERGENT
•
LOAD DIRECTION: ANGULAR
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
LOAD DIRECTIONANGULAR
SELF-ALIGNMENT LOCATIONINTERNAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-SEPARABLE
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
220-7Interchangeable
interchangeable cross-reference
interchangeable
NAS220-7Interchangeable
interchangeable cross-reference
interchangeable
8526696Interchangeable
interchangeable cross-reference
interchangeable
D15-453DPC110Interchangeable
interchangeable cross-reference
interchangeable
D15-615BPC110Interchangeable
interchangeable cross-reference
interchangeable
D15-453BPC110Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200-219?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200-219?
200-219 is a COIL,RADIO FREQUENCY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 200-219?
There are 20 known substitutes for 200-219: 220-7, NAS220-7, 8526696 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 200-219?
200-219 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5078. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200-219

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026