PartsTable
Technical Data Sheet
Download PDF

200-1108-010 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

200-1108-010: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include angle: 28.3 DEGREES NOMINAL28.3 DEGREES NOMINAL, material: RUBBER SILICONE CLASS Q OVERALL, groove_width: 0.79 MILLIMETERS NOMINAL0.79 MILLIMETERS NOMINAL MM, groove_length: 1.91 MILLIMETERS NOMINAL1.91 MILLIMETERS NOMINAL MM, overall_length: 900.0 MILLIMETERS NOMINAL900.0 MILLIMETERS NOMINAL MM, special_features: HARDNESS 45.0TO 55.0 SHORE DUROMETER AHARDNESS 45.0TO 55.0 SHORE DUROMETER A. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-092-8750, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200-1108-010
NSN: 5330-01-092-8750
FSC: 5330 — Packing and Gasket Materials
CAGE: 02988 — FREUDENBERG-NOK (CAN)
SPECIFICATIONS
angle28.3 DEGREES NOMINAL28.3 DEGREES NOMINAL
materialRUBBER SILICONE CLASS Q OVERALL
groove_width0.79 MILLIMETERS NOMINAL0.79 MILLIMETERS NOMINAL MM
groove_length1.91 MILLIMETERS NOMINAL1.91 MILLIMETERS NOMINAL MM
overall_length900.0 MILLIMETERS NOMINAL900.0 MILLIMETERS NOMINAL MM
special_featuresHARDNESS 45.0TO 55.0 SHORE DUROMETER AHARDNESS 45.0TO 55.0 SHORE DUROMETER A
style_designatorSTRIP
cross-sectional_width3.43 MILLIMETERS NOMINAL3.43 MILLIMETERS NOMINAL MM
cross-sectional_shape_styleSPECIAL W/ SQUARE SLOTSPECIAL W/ SQUARE SLOT
material_document_and_classificationAR379A-4804 FSCM 02988 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-092-8750
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 200-1108-010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL WIDTH: 3.43 MILLIMETERS NOMINAL3.43 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AR379A-4804 FSCM 02988 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL W/ SQUARE SLOTSPECIAL W/ SQUARE SLOT
•
GROOVE LENGTH: 1.91 MILLIMETERS NOMINAL1.91 MILLIMETERS NOMINAL MM
•
ANGLE: 28.3 DEGREES NOMINAL28.3 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL WIDTH3.43 MILLIMETERS NOMINAL3.43 MILLIMETERS NOMINAL MM
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONAR379A-4804 FSCM 02988 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH900.0 MILLIMETERS NOMINAL900.0 MILLIMETERS NOMINAL MM
CROSS-SECTIONAL SHAPE STYLESPECIAL W/ SQUARE SLOTSPECIAL W/ SQUARE SLOT
GROOVE LENGTH1.91 MILLIMETERS NOMINAL1.91 MILLIMETERS NOMINAL MM
ANGLE28.3 DEGREES NOMINAL28.3 DEGREES NOMINAL
SPECIAL FEATURESHARDNESS 45.0TO 55.0 SHORE DUROMETER AHARDNESS 45.0TO 55.0 SHORE DUROMETER A
MATERIALRUBBER SILICONE CLASS Q OVERALL
GROOVE WIDTH0.79 MILLIMETERS NOMINAL0.79 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 1
10163850Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 200-1108-010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200-1108-010?
200-1108-010 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 200-1108-010?
There is 1 known substitute for 200-1108-010: 10163850. Substitute compatibility should be verified for your specific system.
What is the NSN for 200-1108-010?
200-1108-010 is cataloged in the U.S. Government catalog under NSN 5330-01-092-8750. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200-1108-010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.