PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 200-0218
200-0218 ✓ Verified by PartsTable
Ricoh · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The GASKET is a Ricoh industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.158 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 0.408 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, fastener_length: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-988-7602, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200-0218
NSN: 5305-00-988-7602
FSC: 5305
CAGE: 02145 — RICHARDS IMAGERY INTERPRETATION SYSTEMS, L.L.C. (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL
head_styleFLAT CHAMFER
head_height0.158 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length0.408 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
fastener_length0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.140 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
end_item_identificationMRAP RG-33 AND RG-33 AUV; MEDIUM MINE PROTECTED VEHICLE - MMPV; A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
NSN5305-00-988-7602
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 200-0218 · Ricoh ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.408 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 32
•
WIDTH ACROSS FLATS: 0.140 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
THREAD LENGTH0.408 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
WIDTH ACROSS FLATS0.140 INCHES MINIMUM AND 0.142 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMRAP RG-33 AND RG-33 AUV; MEDIUM MINE PROTECTED VEHICLE - MMPV; A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
NOMINAL THREAD DIAMETER0.164 INCHES IN
SURFACE TREATMENTPASSIVATE OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
8-32X1/2Interchangeable
interchangeable cross-reference
interchangeable
23-00875-007Interchangeable
interchangeable cross-reference
interchangeable
AN515C8R8Interchangeable
interchangeable cross-reference
interchangeable
0444-276Interchangeable
interchangeable cross-reference
interchangeable
MS35461-2Interchangeable
interchangeable cross-reference
interchangeable
4176110-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200-0218?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200-0218?
200-0218 is a GASKET manufactured by Ricoh.
What parts can replace 200-0218?
There are 25 known substitutes for 200-0218: 8-32X1/2, 23-00875-007, AN515C8R8 and 22 more. Substitute compatibility should be verified for your specific system.
Is 200-0218 still available?
200-0218 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200-0218

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026