PartsTable
Technical Data Sheet

200 1-21/64 — CIRCUIT CARD ASSEMBLY

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

200 1-21/64: CIRCUIT CARD ASSEMBLY.

The CIRCUIT CARD ASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 3.312 INCHES NOMINAL IN, overall_length: 4.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-228-1370, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
200 1-21/64
NSN: 5133-00-228-1370
NIINs: 002281370, 002439613
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 42970 — LEAR SIEGLER INC NATIONAL TWIST DRILL AND TOOL DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length3.312 INCHES NOMINAL IN
flute_quantity2
overall_length4.625 INCHES NOMINAL IN
shank_diameter0.328 INCHES NOMINAL IN
special_featuresJOBBERS LG; FRACTIONAL SIZE 21/64
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.3281 INCHES IN
cutting_rotation_directionRIGHT-HAND
NSN5133-00-228-1370
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CIRCUIT CARD ASSEMBLY TITLE COMPONENT PN 200 1-21/64 MFR CIRCUIT CARD ASSEMBLY
KEY FEATURES
•
CUTTING END STYLE: GENERAL PURPOSE
•
TAPER SHANK SIZE DESIGNATOR: 4 MORSE
•
FLUTE LENGTH: 8.750 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 1.3281 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SHANK STYLE: STANDARD TAPER W/TANG
TECHNICAL CHARACTERISTICS
CUTTING END STYLEGENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR4 MORSE
FLUTE LENGTH8.750 INCHES NOMINAL IN
OVERALL LENGTH14.375 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER1.3281 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLESTANDARD TAPER W/TANG
FLUTE QUANTITY2
SPECIAL FEATURESTAPER SHANK LG; FRACTIONAL SIZE 1-21/64
SUBSTITUTES & CROSS-REFERENCES 7
110 1-21/64Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2410 1-21/64Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1302Reference document
Same NSN cross-reference
Reference document — Secondary reference
53185Reference document
Same NSN cross-reference
Reference document — Secondary reference
C12288Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
T-100Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 200 1-21/64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200 1-21/64?
200 1-21/64 is a CIRCUIT CARD ASSEMBLY.
What parts can replace 200 1-21/64?
There are 7 known substitutes for 200 1-21/64: 110 1-21/64, 2410 1-21/64, 1302 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 200 1-21/64?
200 1-21/64 is cataloged in the U.S. Government catalog under NSN 5133-00-228-1370. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200 1-21/64