PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 20-225
20-225 ✓ Verified by PartsTable
Legrand · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DUMMY LOAD,ELECTRICAL is a Legrand industrial component. Key specifications include bearings: NOT INCLUDED, material: STEEL CORROSION RESISTING, bore_type: STRAIGHT, case_style: RECESSED, face_width: 0.625 INCHES NOMINAL IN, seal_width: 0.313 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-086-7369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
20-225
NSN: 5330-00-086-7369
FSC: 5330
CAGE: 89749 — CLARK MATERIAL HANDLING COMPANY (USA)
SPECIFICATIONS
bearingsNOT INCLUDED
materialSTEEL CORROSION RESISTING
bore_typeSTRAIGHT
case_styleRECESSED
face_width0.625 INCHES NOMINAL IN
seal_width0.313 INCHES NOMINAL IN
valve_size6.000 INCHES IN
bonnet_typeINSIDE SPRING
bore_length0.625 INCHES NOMINAL IN
design_formPLAIN
seat_radius0.750 INCHES NOMINAL IN
temp_rating180.0 FAHRENHEIT NOMINAL DEGF
NSN5330-00-086-7369
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 20-225 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
TEMP RATING: 300.0 FAHRENHEIT DEGF
•
ACCOMMODATED SHAFT DIAMETER: 1.563 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
SEAL WIDTH: 0.313 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
CASE STYLE: RECESSED
•
HOUSING BORE DIAMETER: 2.374 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
TEMP RATING300.0 FAHRENHEIT DEGF
ACCOMMODATED SHAFT DIAMETER1.563 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEAL WIDTH0.313 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
CASE STYLERECESSED
HOUSING BORE DIAMETER2.374 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
20225Interchangeable
interchangeable cross-reference
interchangeable
A10067.002.116Interchangeable
interchangeable cross-reference
interchangeable
20330Interchangeable
interchangeable cross-reference
interchangeable
A10067.002.156Interchangeable
interchangeable cross-reference
interchangeable
20225 71T91 PSI PIECE 11Interchangeable
interchangeable cross-reference
interchangeable
2902860-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 20-225?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20-225?
20-225 is a DUMMY LOAD,ELECTRICAL manufactured by Legrand.
What parts can replace 20-225?
There are 15 known substitutes for 20-225: 20225, A10067.002.116, 20330 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 20-225?
20-225 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-086-7369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20-225

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026