PartsTable
Technical Data Sheet
PartsTable / MRO / 20-123G
20-123G ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,FILM is a the manufacturer industrial component. Key specifications include material: IRON OVERALL, body_length: 0.416 INCHES NOMINAL IN, body_diameter: 0.161 INCHES NOMINAL IN, hole_diameter: 0.688 INCHES NOMINAL IN, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-467-9948, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 20-123G
NSN: 5310-00-467-9948
FSC: 5310
CAGE: 27235 — HARDIE-TYNES CO., INC. (USA)
SPECIFICATIONS
materialIRON OVERALL
body_length0.416 INCHES NOMINAL IN
body_diameter0.161 INCHES NOMINAL IN
hole_diameter0.688 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
shoulder_height0.219 INCHES NOMINAL IN
terminal_length1.500 INCHES NOMINAL IN
outside_diameter1.240 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
special_features0.047 IN. RAD BY 0.219 IN. DEEP FOR DOWEL PIN ON SHOULDER BORE DIA IN
style_designatorAXIAL TERMINAL EACH END
shoulder_diameter1.000 INCHES NOMINAL IN
NSN5310-00-467-9948
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 20-123G · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SHOULDERED
•
MATERIAL: IRON OVERALL
•
SHOULDER DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.391 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.688 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.240 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
SHOULDER HEIGHT: 0.219 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES0.047 IN. RAD BY 0.219 IN. DEEP FOR DOWEL PIN ON SHOULDER BORE DIA IN
STYLE DESIGNATORSHOULDERED
MATERIALIRON OVERALL
SHOULDER DIAMETER1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.391 INCHES NOMINAL IN
HOLE DIAMETER0.688 INCHES NOMINAL IN
OUTSIDE DIAMETER1.240 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
SHOULDER HEIGHT0.219 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
947934-1232Interchangeable
interchangeable cross-reference
interchangeable
RL20AD123GInterchangeable
interchangeable cross-reference
interchangeable
S150-415GREVAPC123Interchangeable
Same NIIN cross-reference
interchangeable
150-415GPC123Interchangeable
Same NIIN cross-reference
interchangeable
3315345REVAPC123Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 20-123G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20-123G?
20-123G is a RESISTOR,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).
What parts can replace 20-123G?
There are 5 known substitutes for 20-123G: 947934-1232, RL20AD123G, S150-415GREVAPC123 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 20-123G?
20-123G is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-467-9948. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20-123G

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026