PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 20-106-07026L
20-106-07026L ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, head_style: SPLINE EXTENDED WASHER, grip_length: 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM IN, head_height: 0.393 INCHES NOMINAL IN, thread_class: 3A A, grip_diameter: 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-701-2460, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
20-106-07026L
NSN: 5306-01-701-2460
FSC: 5306
CAGE: 06725 — SPS TECHNOLOGIES, LLC DBA AIR INDUSTRIES COMPANY DIV AIR INDUSTRIES COMPANY (USA)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
head_styleSPLINE EXTENDED WASHER
grip_length1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM IN
head_height0.393 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
thread_length0.763 INCHES NOMINAL IN
fastener_length2.398 INCHES MINIMUM AND 2.428 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE AND LUBRICANT OVERALL
head_minor_diameter0.485 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
end_item_identificationV-22 AIRCRAFT
NSN5306-01-701-2460
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 20-106-07026L · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF)
•
SPECIFICATION/STANDARD DATA: 97499-20-106 MANUFACTURERS STANDARD
•
HEAD STYLE: SPLINE EXTENDED WASHER
•
EXTENDED WASHER THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
EXTENDED WASHER DIAMETER: 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 20
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
SPECIFICATION/STANDARD DATA97499-20-106 MANUFACTURERS STANDARD
HEAD STYLESPLINE EXTENDED WASHER
END ITEM IDENTIFICATIONV-22 AIRCRAFT
EXTENDED WASHER THICKNESS0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
EXTENDED WASHER DIAMETER0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM IN
GRIP DIAMETER0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH20
HEAD MINOR DIAMETER0.485 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD LENGTH0.763 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
20-106-08018LUpgraded Successor
successor cross-reference
successor
20-106Interchangeable
20106
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 20-106-07026L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20-106-07026L?
20-106-07026L is a BOLT,SHEAR.
What parts can replace 20-106-07026L?
There are 2 known substitutes for 20-106-07026L: 20-106-08018L, 20-106. Substitute compatibility should be verified for your specific system.
What is the NSN for 20-106-07026L?
20-106-07026L is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-701-2460. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20-106-07026L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026