PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 20-0267
20-0267 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, joint_type: SCARF-PERIPHERAL OVERALL, temp_rating: -30.0 CELSIUS AND 60.0 CELSIUS DEGC, bore_diameter: 0.7500 INCHES NOMINAL IN, overall_width: 1.6 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-082-4972, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
20-0267
NSN: 5330-00-082-4972
FSC: 5330
CAGE: H0G87 — WIBA ZEVENAAR B.V. (NLD)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
joint_typeSCARF-PERIPHERAL OVERALL
temp_rating-30.0 CELSIUS AND 60.0 CELSIUS DEGC
bore_diameter0.7500 INCHES NOMINAL IN
overall_width1.6 INCHES NOMINAL IN
terminal_typeFLAT CONTACT
load_directionRADIAL
overall_height3.4 INCHES NOMINAL IN
overall_length2.8 INCHES NOMINAL IN
surface_finishGROUND
mounting_methodTERMINAL
NSN5330-00-082-4972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 20-0267 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 162 FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
MATERIAL: ASBESTOS OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
PERIPHERAL DIAMETER0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
JOINT TYPESCARF-PERIPHERAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION162 FSCM 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
MATERIALASBESTOS OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
57546Interchangeable
interchangeable cross-reference
interchangeable
61216Interchangeable
interchangeable cross-reference
interchangeable
S8RInterchangeable
interchangeable cross-reference
interchangeable
C67373Interchangeable
interchangeable cross-reference
interchangeable
8505209Interchangeable
interchangeable cross-reference
interchangeable
07-200267Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 20-0267?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 20-0267?
20-0267 is a BEARING,BALL,ANNULAR.
What parts can replace 20-0267?
There are 16 known substitutes for 20-0267: 57546, 61216, S8R and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 20-0267?
20-0267 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-082-4972. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 20-0267

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026