PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2-902PC12
2-902PC12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include color: WHITE, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, center_hole_diameter: 0.375 INCHES NOMINAL IN, cross-sectional_height: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-980-4924, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-902PC12
NSN: 5330-00-980-4924
FSC: 5330
CAGE: 52253 — FLUID MECHANICS VALVE COMPANY (USA)
SPECIFICATIONS
colorWHITE
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
center_hole_diameter0.375 INCHES NOMINAL IN
cross-sectional_height0.062 INCHES NOMINAL IN
NSN5330-00-980-4924
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-902PC12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.375 INCHES NOMINAL IN
•
COLOR: WHITE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.375 INCHES NOMINAL IN
COLORWHITE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1201TInterchangeable
interchangeable cross-reference
interchangeable
EE367PC48Interchangeable
interchangeable cross-reference
interchangeable
51109Interchangeable
interchangeable cross-reference
interchangeable
A1806Interchangeable
interchangeable cross-reference
interchangeable
21-100004Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-902PC12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-902PC12?
2-902PC12 is a PACKING,PREFORMED.
What parts can replace 2-902PC12?
There are 5 known substitutes for 2-902PC12: 1201T, EE367PC48, 51109 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-902PC12?
2-902PC12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-980-4924. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-902PC12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026