PartsTable
Technical Data Sheet
Download PDF

2-7841-1 — BALANCE WEIGHT,ELEVATOR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

2-7841-1: BALANCE WEIGHT,ELEVATOR.

The BALANCE WEIGHT,ELEVATOR is a the manufacturer industrial component. Key specifications include overall_depth: 0.032 INCHES NOMINAL IN, overall_width: 12.00 INCHES NOMINAL IN, overall_height: 48.0 INCHES NOMINAL IN, end_item_identification: B-52, aircraft_mission_design_series: B-52 STRATOFORTRESS, part_name_assigned_by_controlling_agency: BALANCE PANEL ELEVATOR. This part is cataloged in the U.S.

Government catalog under NSN 3010-00-432-8495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-7841-1
NSN: 3010-00-432-8495
NIINs: 004328495, 016283694
FSC: 3010 — Torque Converters and Speed Changers
CAGE: 77873 — ROCKFORD POWERTRAIN INC DIV POWERTRAIN ROCKFORD, INC. (USA)
SPECIFICATIONS
overall_depth0.032 INCHES NOMINAL IN
overall_width12.00 INCHES NOMINAL IN
overall_height48.0 INCHES NOMINAL IN
special_featuresMATERIAL: ALUMINUM ALLOY 2024-0, SHEET QQ-A-362, 0 TEMPER, HEAT TREATMENT: T4, FINISH: F-2.115, HEAT TREAT SPECIFICATIONS PER MIL-H-6055 BAC 5602
end_item_identificationB-52
aircraft_mission_design_seriesB-52 STRATOFORTRESS
part_name_assigned_by_controlling_agencyBALANCE PANEL ELEVATOR
NSN3010-00-432-8495
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BALANCE WEIGHT,ELEVATOR TITLE COMPONENT PN 2-7841-1 MFR BALANCE WEIGHT,ELEVATO
KEY FEATURES
•
SECURING HOLE LOCATION: 1.688 IN. BY 4.500 IN. CENTERS ON FORK FACE IN
•
FORK HEIGHT: 5.829 INCHES MINIMUM AND 5.854 INCHES MAXIMUM IN
•
SHAFT SPLINE QUANTITY: 16
•
OUTSIDE DIAMETER: 2.625 INCHES MINIMUM AND 2.628 INCHES MAXIMUM IN
•
FORK WIDTH: 5.530 INCHES MINIMUM AND 5.532 INCHES MAXIMUM IN
•
CONNECTION END TYPE: HUB
•
SECURING HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS
SECURING HOLE LOCATION1.688 IN. BY 4.500 IN. CENTERS ON FORK FACE IN
FORK HEIGHT5.829 INCHES MINIMUM AND 5.854 INCHES MAXIMUM IN
SHAFT SPLINE QUANTITY16
OUTSIDE DIAMETER2.625 INCHES MINIMUM AND 2.628 INCHES MAXIMUM IN
FORK WIDTH5.530 INCHES MINIMUM AND 5.532 INCHES MAXIMUM IN
CONNECTION END TYPEHUB
SECURING HOLE QUANTITY4
SPECIAL FEATURESBSYF 32 MICROINCH
HUB MACHINED SURFACE FINISH OUTSIDE LENGTH0.875 INCHES NOMINAL IN
MINOR DIAMETER1.875 INCHES MINIMUM AND 1.880 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
2584229Reference document
Same NSN cross-reference
Reference document — Secondary reference
23749JReference document
Same NSN cross-reference
Reference document — Secondary reference
62NYS36-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 2-7841-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-7841-1?
2-7841-1 is a BALANCE WEIGHT,ELEVATOR.
What parts can replace 2-7841-1?
There are 3 known substitutes for 2-7841-1: 2584229, 23749J, 62NYS36-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-7841-1?
2-7841-1 is cataloged in the U.S. Government catalog under NSN 3010-00-432-8495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-7841-1