PartsTable
Technical Data Sheet
Download PDF

2-6165-22 — STIFFENER,AIRCRAFT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2-6165-22: STIFFENER,AIRCRAFT.

The STIFFENER,AIRCRAFT is a the manufacturer industrial component. Key specifications include overall_length: 40.000 INCHES NOMINAL IN, special_features: OPPOSITE -21;MAKE FROM BAC1506;HEAT TREAT T6;FINISH F-2.30, aircraft_location: HINGE BOMB DOOR RIB INSTL, aircraft_station_number: UPPER BOMB BAY, aircraft_mission_design_series: B-52G/H G, material_document_and_classification: QQ-A-277 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-472-4924, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-6165-22
NSN: 5310-01-472-4924
NIINs: 014724924, 016027898
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
overall_length40.000 INCHES NOMINAL IN
special_featuresOPPOSITE -21;MAKE FROM BAC1506;HEAT TREAT T6;FINISH F-2.30
aircraft_locationHINGE BOMB DOOR RIB INSTL
aircraft_station_numberUPPER BOMB BAY
aircraft_mission_design_seriesB-52G/H G
material_document_and_classificationQQ-A-277 FED SPEC SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyCHORD
NSN5310-01-472-4924
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2-6165-22 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD PITCH DIAMETERS: +0.4500 TO 0.4565 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTMA193B7 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NUT HEIGHT: 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD PITCH DIAMETERS+0.4500 TO 0.4565 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTMA193B7 ASSN STD ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NUT HEIGHT0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
NUT STYLEHEXAGON
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 2
2616-5C-PC 22Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2616-5CReference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2-6165-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-6165-22?
2-6165-22 is a STIFFENER,AIRCRAFT.
What parts can replace 2-6165-22?
There are 2 known substitutes for 2-6165-22: 2616-5C-PC 22, 2616-5C. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-6165-22?
2-6165-22 is cataloged in the U.S. Government catalog under NSN 5310-01-472-4924. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-6165-22