PartsTable
Technical Data Sheet
PartsTable / MRO / 2-5555
2-5555 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CAMERA SYSTEM,DIGITAL is a the manufacturer industrial component. Key specifications include material: CORK AND RUBBER OVERALL, shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.218 INCHES NOMINAL SINGLE ACTUATOR IN, shaft_length: 0.700 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A, hole_diameter: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-351-4182, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2-5555
NSN: 5330-00-351-4182
FSC: 5330
CAGE: 29201 — JOHN DEER CONSUMER PRODUCTS INC (USA)
SPECIFICATIONS
materialCORK AND RUBBER OVERALL
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.218 INCHES NOMINAL SINGLE ACTUATOR IN
shaft_length0.700 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
hole_diameter0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
pole_quantity2 SINGLE SECTION FRONT
terminal_typeTAB, SOLDER LUG
thread_length0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_length1.970 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity4 SINGLE SECTION REAR
NSN5330-00-351-4182
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-5555 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.688 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 2.562 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 2.188 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: CORK AND RUBBER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER1.688 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER2.562 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER2.188 INCHES NOMINAL IN
HOLE DIAMETER0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALCORK AND RUBBER OVERALL
BOLT HOLE QUANTITY6
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
25555Interchangeable
interchangeable cross-reference
interchangeable
2-2555Interchangeable
interchangeable cross-reference
interchangeable
10462Interchangeable
interchangeable cross-reference
interchangeable
410462-001Interchangeable
interchangeable cross-reference
interchangeable
819012Interchangeable
interchangeable cross-reference
interchangeable
COOLPIX S10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-5555?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-5555?
2-5555 is a CAMERA SYSTEM,DIGITAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2-5555?
There are 7 known substitutes for 2-5555: 25555, 2-2555, 10462 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-5555?
2-5555 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-351-4182. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-5555

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026